diff --git a/hw/ip/flash_ctrl/dv/env/flash_ctrl_seq_cfg.sv b/hw/ip/flash_ctrl/dv/env/flash_ctrl_seq_cfg.sv
index b7aeea8..dcddde9 100644
--- a/hw/ip/flash_ctrl/dv/env/flash_ctrl_seq_cfg.sv
+++ b/hw/ip/flash_ctrl/dv/env/flash_ctrl_seq_cfg.sv
@@ -100,6 +100,9 @@
   // Timeout for erase transaction
   uint erase_timeout_ns;
 
+  // Expected time for the erase-suspend operation
+  uint erase_suspend_expected_time_ns;
+
   // Timeout for read transaction
   uint read_timeout_ns;
 
@@ -215,13 +218,15 @@
 
     check_mem_post_tran = 1'b1;
 
-    prog_timeout_ns = 10_000_000;  // 10ms
+    prog_timeout_ns                     = 10_000_000;   // 10ms
 
-    read_timeout_ns = 10_000_000;  // 10ms
+    read_timeout_ns                     = 100_000;      // 100us
 
-    erase_timeout_ns = 120_000_000;  // 120ms
+    erase_timeout_ns                    = 120_000_000;  // 120ms
 
-    state_wait_timeout_ns = 500_000; // 500us
+    erase_suspend_expected_time_ns      = 50_000;       // 50us
+
+    state_wait_timeout_ns               = 500_000;      // 500us
 
     en_init_keys_seeds = 1'b0;  // Off
 
diff --git a/hw/ip/flash_ctrl/dv/env/seq_lib/flash_ctrl_erase_suspend_vseq.sv b/hw/ip/flash_ctrl/dv/env/seq_lib/flash_ctrl_erase_suspend_vseq.sv
index 381b766..cc0628b 100644
--- a/hw/ip/flash_ctrl/dv/env/seq_lib/flash_ctrl_erase_suspend_vseq.sv
+++ b/hw/ip/flash_ctrl/dv/env/seq_lib/flash_ctrl_erase_suspend_vseq.sv
@@ -28,17 +28,14 @@
 
     // randomize memory
     cfg.seq_cfg.flash_init_set_pc             = 0;
-
   endfunction
 
+  // Flash ctrl operation data queue - used for programing or reading the flash.
+  data_q_t    flash_op_data;
+
   // Randomized flash ctrl operation.
   rand flash_op_t flash_op;
 
-  rand uint bank;
-
-  // Constraint for banks.
-  constraint bank_c {bank inside {[0 : flash_ctrl_pkg::NumBanks - 1]};}
-
   // Constraint address to be in relevant range for the selected partition.
   constraint addr_c {
     if (flash_op.partition != FlashPartData) {
@@ -85,10 +82,7 @@
 
       mp_regions[i].erase_en == MuBi4True;
 
-      mp_regions[i].scramble_en dist {
-        MuBi4False :/ (100 - cfg.seq_cfg.mp_region_scramble_en_pc),
-        MuBi4True  :/ cfg.seq_cfg.mp_region_scramble_en_pc
-      };
+      mp_regions[i].scramble_en == MuBi4False;
 
       mp_regions[i].ecc_en == MuBi4False;
 
@@ -186,6 +180,9 @@
       `DV_CHECK_RANDOMIZE_FATAL(this)
       reset_flash();
       do_erase();
+      // Check that the erase suspended by initiating a read to another page of the flash and make
+      // sure it completes in a reasonable time relevant for read - cfg.seq_cfg.read_timeout_ns.
+      check_erase_suspended();
       // Check recovery by initiating an additional erase to the affected page and backdoor
       // verify it.
       // After an erase is suspended, the page must be erased before any other transaction can be
@@ -205,7 +202,6 @@
 
     // Configure the flash with scramble disable.
     foreach (mp_regions[k]) begin
-      mp_regions[k].scramble_en = 0;
       flash_ctrl_mp_region_cfg(k, mp_regions[k]);
       `uvm_info(`gfn, $sformatf("MP regions values %p", mp_regions[k]), UVM_HIGH)
     end
@@ -223,7 +219,7 @@
     flash_ctrl_bank_erase_cfg(.bank_erase_en(bank_erase_en));
 
     // 1. Scenario - erase is not active
-    `uvm_info(`gfn, $sformatf("Scenario 1: erase is not active"), UVM_HIGH)
+    `uvm_info(`gfn, $sformatf("Scenario 1: Erase is not active"), UVM_HIGH)
 
     // Read data before writing
     csr_rd(.ptr(ral.erase_suspend), .value(data));
@@ -238,7 +234,7 @@
     csr_rd_check(.ptr(ral.erase_suspend.req), .compare_value(0));
 
     // 2. Scneario - Erase is in progress
-    `uvm_info(`gfn, $sformatf("2. Scenario - Erase is in progress"), UVM_HIGH)
+    `uvm_info(`gfn, $sformatf("Scenario 2: Erase is in progress"), UVM_HIGH)
 
     `uvm_info(`gfn, $sformatf("FLASH OP ERASE START OP: %0p", flash_op), UVM_HIGH)
     flash_ctrl_start_op(flash_op);
@@ -250,36 +246,54 @@
 
     // WAITING THAT ERASE SUSPEND REQ IS DONE AND REQ RETURNED TO ZERO
     `DV_SPINWAIT(do begin
-    csr_rd(.ptr(ral.erase_suspend), .value(data));
-      `uvm_info(`gfn, $sformatf("ERASE SUSPEND REQ: %0p", data), UVM_HIGH)
-    end while (data == 1);, "ERASE SUSPEND TIMEOUT OCCURED!", cfg.seq_cfg.erase_timeout_ns)
+                   csr_rd(.ptr(ral.erase_suspend), .value(data));
+                   `uvm_info(`gfn, $sformatf("ERASE SUSPEND REQ: %0p", data), UVM_HIGH)
+                 end while (data == 1);,
+                 "ERASE SUSPEND TIMEOUT OCCURED!", cfg.seq_cfg.erase_timeout_ns)
 
-    wait_flash_op_done(.timeout_ns(cfg.seq_cfg.erase_timeout_ns));
+    wait_flash_op_done(.timeout_ns(cfg.seq_cfg.erase_suspend_expected_time_ns));
 
   endtask : do_erase
 
+  // Check that the erase suspended by initiating a read to another page of the flash and make
+  // sure it completes in a reasonable time relevant for read - cfg.seq_cfg.read_timeout_ns.
+  // If the erase that suspended was bank-erase, make sure to read from the other bank.
+  task check_erase_suspended();
+    flash_op_t flash_op_erase = flash_op;
+    `DV_CHECK_MEMBER_RANDOMIZE_WITH_FATAL(flash_op,
+                     flash_op.partition != flash_op_erase.partition ||
+                     flash_op.addr[FlashMemAddrBankMsbBit-:(FlashBankWidth+FlashPageWidth)] !=
+                     flash_op_erase.addr[FlashMemAddrBankMsbBit-:(FlashBankWidth+FlashPageWidth)];
+                     if (flash_op_erase.erase_type == flash_ctrl_pkg::FlashEraseBank) {
+                       flash_op.addr[FlashMemAddrBankMsbBit] !=
+                       flash_op_erase.addr[FlashMemAddrBankMsbBit];
+                     })
+    flash_op.op = FlashOpRead;
+    `uvm_info(`gfn, $sformatf("START READ DIFFERENT PAGE TO CHECK THE ERASE IS SUSPENDED, op: %p",
+                              flash_op), UVM_HIGH)
+    flash_ctrl_start_op(flash_op);
+    flash_ctrl_read(flash_op.num_words, flash_op_data, 1'b0);
+    wait_flash_op_done(.timeout_ns(cfg.seq_cfg.read_timeout_ns));
+    flash_op = flash_op_erase;
+  endtask : check_erase_suspended
+
   // Task to run another erase on the page in which the erase-suspend done and check it complete
   // successfully.
   // After an erase is suspended, the page must be erased before any other transaction can be
   // initiated to the selected page.
   task check_recovery();
-    // Flash ctrl operation data queue - used for programing or reading the flash.
-    data_q_t    flash_op_data;
     // Expected data.
     data_q_t    exp_data;
 
     `DV_CHECK_STD_RANDOMIZE_WITH_FATAL(flash_op_data, flash_op_data.size() == 0;)
 
-    cfg.clk_rst_vif.wait_clks($urandom_range(15, 30));
-
-    `uvm_info(`gfn, $sformatf("Starting flash_ctrl op: %p", flash_op), UVM_LOW)
+    `uvm_info(`gfn, $sformatf("START ERASE THE SAME PAGE TO CHECK RECOVERY flash_ctrl op: %p",
+                              flash_op), UVM_HIGH)
     flash_ctrl_start_op(flash_op);
     exp_data = cfg.calculate_expected_data(flash_op, flash_op_data);
-
     wait_flash_op_done(.timeout_ns(cfg.seq_cfg.erase_timeout_ns));
     cfg.flash_mem_bkdr_erase_check(flash_op, exp_data);
 
-
   endtask : check_recovery
 
 endclass : flash_ctrl_erase_suspend_vseq