)]}'
{
  "commit": "73f4ec619a8f1e9843adb67d65cb13e488b3de23",
  "tree": "f855dd51f8c2696034e80457cfa2b548ab8d2ca2",
  "parents": [
    "36dfba28ea045134815f481b1d292d743fdbb1d9"
  ],
  "author": {
    "name": "Philipp Wagner",
    "email": "phw@lowrisc.org",
    "time": "Thu Sep 03 14:05:14 2020 +0100"
  },
  "committer": {
    "name": "Philipp Wagner",
    "email": "mail@philipp-wagner.com",
    "time": "Sat Sep 05 18:04:39 2020 +0200"
  },
  "message": "[otbn] Better specify \"result\" when setting flags\n\nThe L, M and Z flags operate on the \"result\" of an operation. Clarify\nthat this means only the \"lower\" 256 bits as they are written back to\nthe destination register, not the overflow bit (which is present in the\ncarry flag).\n\nFixes #3336 (See also this issue for a long reason by Felix Miller why\nthis is the correct behavior.)\n\nSigned-off-by: Philipp Wagner \u003cphw@lowrisc.org\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "274e3c9df61abd8fc787699760100e479c2efe5b",
      "old_mode": 33188,
      "old_path": "hw/ip/otbn/doc/_index.md",
      "new_id": "47232ec3bb4e143fac093abb6d3800b5ad4c76ea",
      "new_mode": 33188,
      "new_path": "hw/ip/otbn/doc/_index.md"
    }
  ]
}