| # Copyright lowRISC contributors. | |
| # Licensed under the Apache License, Version 2.0, see LICENSE for details. | |
| # SPDX-License-Identifier: Apache-2.0 | |
| # | |
| # Meridian RDC Reset Scenario | |
| ################### | |
| # Reset Scenarios # | |
| ################### | |
| # TODO: SPI_CSB asserted(release from reset) only when SYS_RST_N is not asserted | |
| # POR_N | |
| # When POR_N released, POK remains high (already released from reset) | |
| # dio_pad_attr_q[12] is SCK PAD. The invert signal remains 0 always | |
| # | |
| # TODO: Create two scns (either vcmain_pok 0 (turn off all clock), or | |
| # vcmain_pok 1 (all clocks alive)) | |
| # regulator FSM stays in VCMON when POR_N is asserted. | |
| set_reset_scenario { \ | |
| { POR_N { reset { @t0 1 } {#2 0} { #10 1} }} \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint {@t0 1} }} \ | |
| { top_earlgrey.u_pinmux_aon.dio_pad_attr_q[12].invert \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_spi_device.cio_sck_i { constraint { @t0 0 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.rgls_sm[0] { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.rgls_sm[1] { constraint { @t0 0 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.rgls_sm[2] { constraint { @t0 0 } } } \ | |
| } -name ScnPOR | |
| # AST AON POK | |
| # When AON_POK drops, main_pok goes to 0 also | |
| set_reset_scenario { \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { reset { @t0 1 } { #5 0 } { #10 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcmain_pok_h { reset { @t0 1 } { #5 0 } { #10 1 } } } \ | |
| { POR_N { constraint { @t0 1 } } } \ | |
| { top_earlgrey.u_spi_device.cio_sck_i { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_usb_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div2_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_aes { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_hmac { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_kmac { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_otbn { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_usb_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div2_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_secure { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_secure { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_timers { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div2_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_usb_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.pwrmgr_aon_low_power { constraint { @t0 1 } } } \ | |
| { top_earlgrey.spi_device_passthrough_req.passthrough_en { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_spi_host0.reg2hw.control.output_en.q { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.tap_strap_q { constraint { @t0 0 } } } \ | |
| } -name ScnAonPOK | |
| # AST Regulator Resets | |
| # This scenario is entering low power mode (not brownout) in that case the | |
| # clocks other than clk_aon are gated prior to turn off main power. | |
| set_reset_scenario { \ | |
| { u_ast.u_rglts_pdm_3p3v.vcmain_pok_h { reset { @t0 1 } { #2 0 } { #10 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint { @t0 1} } } \ | |
| { top_earlgrey.u_spi_device.cio_sck_i { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_usb_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div2_powerup { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_aes { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_hmac { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_kmac { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_otbn { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_usb_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div2_infra { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_secure { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_main_secure { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_timers { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div4_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_div2_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_io_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.clkmgr_aon_clocks.clk_usb_peri { constraint { @t0 0 } } } \ | |
| { top_earlgrey.pwrmgr_aon_low_power { constraint { @t0 1 } } } \ | |
| { top_earlgrey.spi_device_passthrough_req.passthrough_en { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_spi_host0.reg2hw.control.output_en.q { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.tap_strap_q { constraint { @t0 0 } } } \ | |
| } -name ScnMainPok | |
| #set_reset_scenario { \ | |
| # { u_ast.u_rglts_pdm_3p3v.rglssm_vmppr_h_o { reset { @t0 0 } { #10 1}}} \ | |
| # { top_earlgrey.u_spi_device.cio_sck_i { constraint { @t0 0 } } } \ | |
| #} -name ScnRglSsmVmppr | |
| # | |
| #set_reset_scenario { \ | |
| # { u_ast.u_rglts_pdm_3p3v.deep_sleep_h_o \ | |
| # { reset { @t0 1 } { #10 0} { #10 0 }} \ | |
| # } \ | |
| #} -name ScnRglDeepSleep | |
| # PWRMGR Reset Cause | |
| # RSTMGR SW Resets | |
| #set_reset_scenario { {{top_earlgrey.u_rstmgr_aon.u_ndm_sync.u_sync_2.gen_generic.u_impl_generic.q_o[0]} {reset { @t0 1 } { #10 0}} }} -name Scenario8 -comment "functional reset" | |
| set_reset_scenario { \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_0.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_1.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_2.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_3.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_4.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_5.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_6.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| {{top_earlgrey.u_rstmgr_aon.u_reg.u_sw_rst_ctrl_n_7.q[0]} {reset { @t0 1 } { #2 0 } { #10 1}} } \ | |
| { POR_N { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcmain_pok_h { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint { @t0 1 } } } \ | |
| { top_earlgrey.u_spi_device.cio_sck_i { constraint { @t0 0 } } } \ | |
| { top_earlgrey.spi_device_passthrough_req.passthrough_en { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_spi_host0.reg2hw.control.output_en.q { constraint { @t0 0 } } } \ | |
| } -name RstMgrSwRst -comment "RSTMGR SW Controlled Resets" | |
| # SPI_DEVICE FIFO Reset (Sync) | |
| # They can be asserted only in Generic Mode. Keep Mode in Generic then assert | |
| # reset. | |
| # | |
| # Assume control_mode is Generic mode `CONTROL.mode {constraint {@t0 0}}` | |
| # Then `CONTROL.rst_rxfifo` 0 -> 1 {after 10 clks} -> 0 {after 4 clks} | |
| set_reset_scenario { \ | |
| { {top_earlgrey.u_spi_device.u_reg.u_control_rst_rxfifo.q[0]} \ | |
| {reset { @t0 0 } { #10 1} { #4 0 }} } \ | |
| { top_earlgrey.u_spi_device.u_reg.u_control_mode.q \ | |
| {constraint { @t0 S } } } \ | |
| { top_earlgrey.u_spi_device.rst_csb_buf {constraint { @t0 1 } } } \ | |
| } -name SpidRstRxFifo -comment "SPI_DEVICE Async RX FIFO Functional Reset" | |
| set_reset_scenario { \ | |
| { {top_earlgrey.u_spi_device.u_reg.u_control_rst_txfifo.q[0]} \ | |
| {reset { @t0 0 } { #10 1} { #4 0 }} } \ | |
| { top_earlgrey.u_spi_device.u_reg.u_control_mode.q \ | |
| {constraint { @t0 S } } } \ | |
| { top_earlgrey.u_spi_device.rst_csb_buf {constraint { @t0 1 } } } \ | |
| } -name SpidRstTxFifo -comment "SPI_DEVICE Async TX FIFO Functional Reset" | |
| # SPI_DEVICE CSb Reset. IP reset should be stable | |
| set_reset_scenario { \ | |
| { {top_earlgrey.u_spi_device.rst_csb_buf} { reset { @t0 1 } { #10 0} } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint { @t0 1 } } } \ | |
| { top_earlgrey.u_spi_device.rst_ni { constraint { @t0 1 } } } \ | |
| } -name RstSpidCsb -comment "SPI_DEVICE CSb Assertion" | |
| # SPI_DEVICE TPM CSb Reset. SPID IP reset should be stable | |
| set_reset_scenario { \ | |
| { {top_earlgrey.u_spi_device.rst_tpm_csb_buf} \ | |
| {reset { @t0 1} {#10 0}} } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint { @t0 1 } } } \ | |
| { POR_N { constraint { @t0 1 } } } \ | |
| { top_earlgrey.u_spi_device.rst_ni { constraint { @t0 1 } } } \ | |
| } -name RstSpidTpmCsb -comment "SPI_DEVICE TPM CSb Assertion" | |
| # JTAG Scenarios | |
| ## RV_DM | |
| set_reset_scenario { \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.jtag_req.trst_n \ | |
| { reset { @t0 1 } { #10 0 } { #10 1 } } } \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.tap_strap_q[1] { constraint { @t0 1 } } } \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.tap_strap_q[0] { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_rv_dm.dap.i_dmi_cdc.i_cdc_req.u_prim_sync_reqack.gen_rz_hs_protocol.dst_fsm_q \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_rv_dm.dap.i_dmi_cdc.i_cdc_req.wvalid_i \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_rv_dm.dap.i_dmi_cdc.i_cdc_req.pending_q \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_rv_dm.dap.i_dmi_cdc.i_cdc_req.u_prim_sync_reqack.gen_rz_hs_protocol.src_fsm_q \ | |
| { constraint { @t0 0 } } } \ | |
| { POR_N { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcmain_pok_h { constraint { @t0 1 } } } \ | |
| } -name JtagRvDm -comment "RV_DM JTAG Reset Scenario" | |
| ## LC_CTRL | |
| set_reset_scenario { \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.jtag_req.trst_n \ | |
| { reset { @t0 1 } { #10 0 } { #10 1 } } } \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.tap_strap_q[1] { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_pinmux_aon.u_pinmux_strap_sampling.tap_strap_q[0] { constraint { @t0 1 } } } \ | |
| { top_earlgrey.u_lc_ctrl.u_dmi_jtag.i_dmi_cdc.i_cdc_req.u_prim_sync_reqack.gen_rz_hs_protocol.dst_fsm_q \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_lc_ctrl.u_dmi_jtag.i_dmi_cdc.i_cdc_req.u_prim_sync_reqack.gen_rz_hs_protocol.src_fsm_q \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_lc_ctrl.u_dmi_jtag.i_dmi_cdc.i_cdc_req.wvalid_i \ | |
| { constraint { @t0 0 } } } \ | |
| { top_earlgrey.u_lc_ctrl.u_dmi_jtag.i_dmi_cdc.i_cdc_req.pending_q \ | |
| { constraint { @t0 0 } } } \ | |
| { POR_N { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcaon_pok_h { constraint { @t0 1 } } } \ | |
| { u_ast.u_rglts_pdm_3p3v.vcmain_pok_h { constraint { @t0 1 } } } \ | |
| } -name JtagLifeCycle -comment "LC_CTRL JTAG Reset Scenario" |