// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#ifndef OPENTITAN_SW_DEVICE_LIB_DIF_DIF_USBDEV_H_
#define OPENTITAN_SW_DEVICE_LIB_DIF_DIF_USBDEV_H_

/**
 * @file
 * @brief <a href="/hw/ip/usbdev/doc/">USB Device</a> Device Interface Functions
 */

#include <stddef.h>
#include <stdint.h>
#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_warn_unused_result.h"

#ifdef __cplusplus
extern "C" {
#endif  // __cplusplus

/**
 * Hardware constants.
 */
#define USBDEV_NUM_ENDPOINTS 12
#define USBDEV_MAX_PACKET_SIZE 64
// Internal constant that should not be used by clients. Defined here because
// it is used in the definition of `dif_usbdev_buffer_pool` below.
#define USBDEV_NUM_BUFFERS 32

/**
 * Free buffer pool.
 *
 * A USB device has a fixed number of buffers that are used for storing incoming
 * and outgoing packets and the software is responsible for keeping track of
 * free buffers. The pool is implemented as a stack for constant-time add and
 * remove. `top` points to the last free buffer added to the pool. The pool is
 * full when `top == USBDEV_NUM_BUFFERS - 1` and empty when `top == -1`.
 */
typedef struct dif_usbdev_buffer_pool {
  uint8_t buffers[USBDEV_NUM_BUFFERS];
  int8_t top;
} dif_usbdev_buffer_pool_t;

/**
 * Buffer types.
 */
typedef enum dif_usbdev_buffer_type {
  /**
   * For reading payloads of incoming packets.
   */
  kDifUsbdevBufferTypeRead,
  /**
   * For writing payloads of outgoing packets.
   */
  kDifUsbdevBufferTypeWrite,
  /**
   * Clients must not use a buffer after it is handed over to hardware or
   * returned to the free buffer pool. This type exists to protect against such
   * cases.
   */
  kDifUsbdevBufferTypeStale,
} dif_usbdev_buffer_type_t;

/**
 * A USB device buffer.
 *
 * This struct represents a USB device buffer that has been provided to a client
 * in response to a buffer request. Clients should treat instances of this
 * struct as opaque objects and should pass them to the appropriate functions of
 * this library to read and write payloads of incoming and outgoing packets,
 * respectively.
 *
 * See also: `dif_usbdev_recv`, `dif_usbdev_buffer_read`,
 * `dif_usbdev_buffer_request`, `dif_usbdev_buffer_write`,
 * `dif_usbdev_send`, `dif_usbdev_buffer_return`.
 */
typedef struct dif_usbdev_buffer {
  /**
   * Hardware buffer id.
   */
  uint8_t id;
  /**
   * Byte offset for the next read or write operation.
   */
  uint8_t offset;
  /**
   * For read buffers: remaining number of bytes to read.
   * For write buffers: remaining number of bytes that can be written.
   */
  uint8_t remaining_bytes;
  /**
   * Type of this buffer.
   */
  dif_usbdev_buffer_type_t type;
} dif_usbdev_buffer_t;

/**
 * Internal state of a USB device.
 *
 * Instances of this struct must be initialized by `dif_usbdev_init()` before
 * being passed to other functions in this library. Its fields should be
 * considered private and are only provided here so that callers can allocate
 * it.
 */
typedef struct dif_usbdev {
  mmio_region_t base_addr;
  dif_usbdev_buffer_pool_t buffer_pool;
} dif_usbdev_t;

/**
 * Enumeration for enabling/disabling various functionality.
 */
typedef enum dif_usbdev_toggle {
  kDifUsbdevToggleDisable,
  kDifUsbdevToggleEnable,
} dif_usbdev_toggle_t;

/**
 * Set of allowed configurations for USB power sense override.
 */
typedef enum dif_usbdev_power_sense_override {
  kDifUsbdevPowerSenseOverrideDisabled,
  kDifUsbdevPowerSenseOverridePresent,
  kDifUsbdevPowerSenseOverrideNotPresent
} dif_usbdev_power_sense_override_t;

/**
 * Configuration for initializing a USB device.
 */
typedef struct dif_usbdev_config {
  /**
   * Base address of the USB device.
   */
  mmio_region_t base_addr;
  /**
   * Use the differential rx signal instead of the single-ended signals.
   */
  dif_usbdev_toggle_t differential_rx;
  /**
   * Use the differential tx signal instead of the single-ended signals.
   */
  dif_usbdev_toggle_t differential_tx;
  /*
   * Recognize a single SE0 bit as end of packet instead of requiring
   * two bits.
   */
  dif_usbdev_toggle_t single_bit_eop;
  /**
   * Override USB power sense.
   */
  dif_usbdev_power_sense_override_t power_sense_override;
  /**
   * Flip the D+/D- pins.
   */
  dif_usbdev_toggle_t pin_flip;
  /**
   * Reference signal generation for clock synchronization.
   */
  dif_usbdev_toggle_t clock_sync_signals;
} dif_usbdev_config_t;

/**
 * Common return codes for the functions in this library.
 */
typedef enum dif_usbdev_result {
  /**
   * Indicates that the call succeeded.
   */
  kDifUsbdevOK = 0,
  /**
   * Indicates that a non-specific error occurred and the hardware is in an
   * invalid or irrecoverable state.
   */
  kDifUsbdevError = 1,
  /**
   * Indicates that the caller supplied invalid arguments but the call did not
   * cause any side-effects and the hardware is in a valid and recoverable
   * state.
   */
  kDifUsbdevBadArg = 2,
} dif_usbdev_result_t;

/**
 * Initialize a USB device.
 *
 * A USB device must first be initialized by this function before calling other
 * functions in this library.
 *
 * @param config Configuration for initializing a USB device.
 * @param[out] usbdev Internal state of the initialized USB device.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_init(dif_usbdev_config_t *config,
                                    dif_usbdev_t *usbdev);

/**
 * Fill the available buffer FIFO of a USB device.
 *
 * The USB device has a small FIFO (AV FIFO) that stores free buffers for
 * incoming packets. It is the responsibility of the software to ensure that the
 * AV FIFO is never empty. If the host tries to send a packet when the AV FIFO
 * is empty, the USB device will respond with a NAK. While this will typically
 * cause the host to retry transmission for regular data packets, there are
 * transactions in the USB protocol during which the USB device is not allowed
 * to send a NAK. Thus, the software must make sure that the AV FIFO is never
 * empty by calling this function periodically.
 *
 * @param usbdev A USB device.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_fill_available_fifo(dif_usbdev_t *usbdev);

/**
 * Enable or disable reception of SETUP packets for an endpoint.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param new_state New SETUP packet reception state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_endpoint_setup_enable(
    dif_usbdev_t *usbdev, uint8_t endpoint, dif_usbdev_toggle_t new_state);

/**
 * Enable or disable reception of OUT packets for an endpoint.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param new_state New OUT packet reception state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_endpoint_out_enable(
    dif_usbdev_t *usbdev, uint8_t endpoint, dif_usbdev_toggle_t new_state);

/**
 * Enable or disable STALL for an endpoint.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param new_state New STALL state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_endpoint_stall_enable(
    dif_usbdev_t *usbdev, uint8_t endpoint, dif_usbdev_toggle_t new_state);

/**
 * Get STALL state of an endpoint.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param[out] state Current STALL state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_endpoint_stall_get(dif_usbdev_t *usbdev,
                                                  uint8_t endpoint,
                                                  bool *state);

/**
 * Enable or disable isochronous mode for an endpoint.
 *
 * Isochronous endpoints transfer data periodically. Since isochronous transfers
 * do not have a handshaking stage, isochronous endpoints cannot report errors
 * or STALL conditions.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param new_state New isochronous state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_endpoint_iso_enable(
    dif_usbdev_t *usbdev, uint8_t endpoint, dif_usbdev_toggle_t new_state);

/**
 * Enable the USB interface of a USB device.
 *
 * Calling this function causes the USB device to assert the full-speed pull-up
 * signal to indicate its presence to the host.
 *
 * @param usbdev A USB device.
 * @param new_state New interface state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_interface_enable(dif_usbdev_t *usbdev,
                                                dif_usbdev_toggle_t new_state);

/**
 * Information about a received packet.
 */
typedef struct dif_usbdev_rx_packet_info {
  /**
   * Endpoint of the packet.
   */
  uint8_t endpoint;
  /**
   * Payload length in bytes.
   */
  uint8_t length;
  /**
   * Indicates if the packet is a SETUP packet.
   */
  bool is_setup;
} dif_usbdev_rx_packet_info_t;

/**
 * Return codes for `dif_usbdev_recv`.
 */
typedef enum dif_usbdev_recv_result {
  /**
   * Indicates that the call succeeded.
   */
  kDifUsbdevRecvResultOK = kDifUsbdevOK,
  /**
   * Indicates that a non-specific error occurred and the hardware is in an
   * invalid or irrecoverable state.
   */
  kDifUsbdevRecvResultError = kDifUsbdevError,
  /**
   * Indicates that the caller supplied invalid arguments but the call did not
   * cause any side-effects and the hardware is in a valid and recoverable
   * state.
   */
  kDifUsbdevRecvResultBadArg = kDifUsbdevBadArg,
  /**
   * Indicates that RX FIFO is empty.
   */
  kDifUsbdevRecvResultNoNewPacket,
} dif_usbdev_recv_result_t;

/**
 * Get the packet at the front of RX FIFO.
 *
 * The USB device has a small FIFO (RX FIFO) that stores received packets until
 * the software has a chance to process them. It is the responsibility of the
 * software to ensure that the RX FIFO is never full. If the host tries to send
 * a packet when the RX FIFO is full, the USB device will respond with a NAK.
 * While this will typically cause the host to retry transmission for regular
 * data packets, there are transactions in the USB protocol during which the USB
 * device is not allowed to send a NAK. Thus, the software must read received
 * packets as soon as possible.
 *
 * Reading received packets involves two main steps:
 * - Calling this function, i.e. `dif_usbdev_recv`, and
 * - Calling `dif_usbdev_buffer_read` until the entire packet payload
 * is read.
 *
 * In order to read an incoming packet, clients should first call this function
 * to get information about the packet and the buffer that holds the packet
 * payload. Then, clients should call `dif_usbdev_buffer_read` with this buffer
 * one or more times (depending on the sizes of their internal buffers) until
 * the entire packet payload is read. Once the entire payload is read, the
 * buffer is returned to the free buffer pool. If the clients want to ignore the
 * payload of a packet, e.g. for an unsupported or a zero-length packet, they
 * can call `dif_usbdev_buffer_return` to immediately return the buffer to the
 * free buffer pool.
 *
 * @param usbdev A USB device.
 * @param[out] packet_info Packet information.
 * @param[out] buffer Buffer that holds the packet payload.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_recv_result_t dif_usbdev_recv(
    dif_usbdev_t *usbdev, dif_usbdev_rx_packet_info_t *packet_info,
    dif_usbdev_buffer_t *buffer);

/**
 * Return codes for `dif_usbdev_buffer_read`.
 */
typedef enum dif_usbdev_buffer_read_result {
  /**
   * Indicates that the call succeeded and the entire packet payload is read.
   */
  kDifUsbdevBufferReadResultOK,
  /**
   * Indicates that a non-specific error occurred and the hardware is in an
   * invalid or irrecoverable state.
   */
  kDifUsbdevBufferReadResultError,
  /**
   * Indicates that the caller supplied invalid arguments but the call did not
   * cause any side-effects and the hardware is in a valid and recoverable
   * state.
   */
  kDifUsbdevBufferReadResultBadArg,
  /**
   * Indicates that the call was successful but there are remaining bytes to be
   * read.
   */
  kDifUsbdevBufferReadResultContinue,
} dif_usbdev_buffer_read_result_t;

/**
 * Read incoming packet payload.
 *
 * Clients should call this function with a buffer provided by `dif_usbdev_recv`
 * to read the payload of an incoming packet. This function copies the smaller
 * of `dst_len` and remaining number of bytes in the buffer to `dst`. The buffer
 * that holds the packet payload is returned to the free buffer pool when the
 * entire packet payload is read.
 *
 * See also: `dif_usbdev_recv`.
 *
 * @param usbdev A USB device.
 * @param buffer A buffer provided by `dif_usbdev_recv`.
 * @param[out] dst Destination buffer.
 * @param dst_len Length of the destination buffer.
 * @param[out] bytes_written Number of bytes written to destination buffer.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_buffer_read_result_t dif_usbdev_buffer_read(
    dif_usbdev_t *usbdev, dif_usbdev_buffer_t *buffer, uint8_t *dst,
    size_t dst_len, size_t *bytes_written);

/**
 * Return a buffer to the free buffer pool.
 *
 * This function immediately returns the given buffer to the free buffer pool.
 * Since `dif_usbdev_buffer_read` and `dif_usbdev_get_tx_status` return the
 * buffers that they work on to the free buffer pool automatically, this
 * function should only be called to discard the payload of a received
 * packet or a packet that was being prepared for transmission before it is
 * queued for transmission from an endpoint.
 *
 * See also: `dif_usbdev_recv`, `dif_usbdev_buffer_request`.
 *
 * @param usbdev A USB device.
 * @param buffer A buffer provided by `dif_usbdev_recv` or
 *               `dif_usbdev_buffer_request`.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_buffer_return(dif_usbdev_t *usbdev,
                                             dif_usbdev_buffer_t *buffer);

/**
 * Return codes for `dif_usbdev_buffer_request`.
 */
typedef enum dif_usbdev_buffer_request_result {
  /**
   * Indicates that the call succeeded.
   */
  kDifUsbdevBufferRequestResultOK = kDifUsbdevOK,
  /**
   * Indicates that a non-specific error occurred and the hardware is in an
   * invalid or irrecoverable state.
   */
  kDifUsbdevBufferRequestResultError = kDifUsbdevError,
  /**
   * Indicates that the caller supplied invalid arguments but the call did not
   * cause any side-effects and the hardware is in a valid and recoverable
   * state.
   */
  kDifUsbdevBufferRequestResultBadArg = kDifUsbdevBadArg,
  /**
   * Indicates that there are no free buffers.
   */
  kDifUsbdevBufferRequestResultNoBuffers,
} dif_usbdev_buffer_request_result_t;

/**
 * Request a buffer for outgoing packet payload.
 *
 * Clients should call this function to request a buffer to write the payload of
 * an outgoing packet. Sending a packet from a particular endpoint to the host
 * involves four main steps:
 * - Calling this function, i.e. `dif_usbdev_buffer_request`,
 * - Calling `dif_usbdev_buffer_write`,
 * - Calling `dif_usbdev_send`, and
 * - Calling `dif_usbdev_get_tx_status`.
 *
 * In order to send a packet, clients should first call this function to obtain
 * a buffer for the packet payload. Clients should then call
 * `dif_usbdev_buffer_write` (one or more times depending on the sizes of their
 * internal buffers) to write the packet payload to this buffer. After writing
 * the packet payload, clients should call `dif_usbdev_send` to mark the packet
 * as ready for transmission from a particular endpoint. Then, clients should
 * call `dif_usbdev_get_tx_status` to check the status of the transmission.
 * `dif_usbdev_get_tx_status` returns the buffer that holds the packet payload
 * to the free buffer pool once the packet is either successfully transmitted or
 * canceled due to an incoming SETUP packet or a link reset. If the packet
 * should no longer be sent, clients can call `dif_usbdev_buffer_return` to
 * return the buffer to the free buffer pool as long as `dif_usbdev_send` is not
 * called yet.
 *
 * See also: `dif_usbdev_buffer_write`, `dif_usbdev_send`,
 * `dif_usbdev_get_tx_status`, `dif_usbdev_buffer_return`.
 *
 * @param usbdev A USB device.
 * @param[out] buffer A buffer for writing outgoing packet payload.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_buffer_request_result_t dif_usbdev_buffer_request(
    dif_usbdev_t *usbdev, dif_usbdev_buffer_t *buffer);

typedef enum dif_usbdev_buffer_write_result {
  /**
   * Indicates that the call succeeded.
   */
  kDifUsbdevBufferWriteResultOK = kDifUsbdevOK,
  /**
   * Indicates that a non-specific error occurred and the hardware is in an
   * invalid or irrecoverable state.
   */
  kDifUsbdevBufferWriteResultError = kDifUsbdevError,
  /**
   * Indicates that the caller supplied invalid arguments but the call did not
   * cause any side-effects and the hardware is in a valid and recoverable
   * state.
   */
  kDifUsbdevBufferWriteResultBadArg = kDifUsbdevBadArg,
  /**
   * Indicates that the requested write exceeds the device buffer size.
   */
  kDifUsbdevBufferWriteResultFull,
} dif_usbdev_buffer_write_result_t;

/**
 * Write outgoing packet payload.
 *
 * Clients should call this function with a buffer provided by
 * `dif_usbdev_buffer_request` to write the payload of an outgoing packet. This
 * function copies the smaller of `src_len` and remaining number of bytes in the
 * buffer to the buffer. Clients should then call `dif_usbdev_send` to queue the
 * packet for transmission from a particular endpoint.
 *
 * See also: `dif_usbdev_buffer_request`, `dif_usbdev_send`,
 * `dif_usbdev_get_tx_status`, `dif_usbdev_buffer_return`.
 *
 * @param usbdev A USB device.
 * @param buffer A buffer provided by `dif_usbdev_buffer_request`.
 * @param src Source buffer.
 * @param src_len Length of the source buffer.
 * @param[out] bytes_written Number of bytes written to the USB device buffer.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_buffer_write_result_t dif_usbdev_buffer_write(
    dif_usbdev_t *usbdev, dif_usbdev_buffer_t *buffer, uint8_t *src,
    size_t src_len, size_t *bytes_written);

/**
 * Mark a packet ready for transmission from an endpoint.
 *
 * The USB device has 12 endpoints, each of which can be used to send packets to
 * the host. Since a packet is not actually transmitted to the host until the
 * host sends an IN token, clients must write the packet payload to a device
 * buffer and mark it as ready for transmission from a particular endpoint. A
 * packet queued for transmission from a particular endpoint is transmitted once
 * the host sends an IN token for that endpoint.
 *
 * After a packet is queued for transmission, clients should check its status by
 * calling `dif_usbdev_get_tx_status`. While the USB device handles transmission
 * errors automatically by retrying transmission, transmission of a packet may
 * be canceled if the endpoint receives a SETUP packet or the link is reset
 * before the queued packet is transmitted. In these cases, clients should
 * handle the SETUP packet or the link reset first and then optionally send the
 * same packet again. Clients must also make sure that the given endpoint does
 * not already have a packet pending for transmission before calling this
 * function.
 *
 * See also: `dif_usbdev_buffer_request`, `dif_usbdev_buffer_write`,
 * `dif_usbdev_get_tx_status`, `dif_usbdev_buffer_return`.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param buffer A buffer provided by `dif_usbdev_buffer_request`.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_send(dif_usbdev_t *usbdev, uint8_t endpoint,
                                    dif_usbdev_buffer_t *buffer);

/**
 * Status of an outgoing packet.
 */
typedef enum dif_usbdev_tx_status {
  /**
   *  There is no packet for the given endpoint.
   */
  kDifUsbdevTxStatusNoPacket,
  /**
   * Packet is pending transmission.
   */
  kDifUsbdevTxStatusPending,
  /**
   * Packet was sent successfully.
   */
  kDifUsbdevTxStatusSent,
  /**
   * Transmission was canceled due to an incoming SETUP packet.
   */
  kDifUsbdevTxStatusCancelled,
} dif_usbdev_tx_status_t;

/**
 * Get the status of a packet that has been queued to be sent from an endpoint.
 *
 * While the USB device handles transmission errors automatically by retrying
 * transmission, transmission of a packet may be canceled if the endpoint
 * receives a SETUP packet or the link is reset before the queued packet is
 * transmitted. In these cases, clients should handle the SETUP packet or the
 * link reset first and then optionally send the same packet again.
 *
 * This function returns the buffer that holds the packet payload to the free
 * buffer pool once the packet is either successfully transmitted or canceled
 * due to an incoming SETUP packet or a link reset.
 *
 * @param usbdev A USB device.
 * @param endpoint An endpoint.
 * @param[out] status Status of the packet.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_get_tx_status(dif_usbdev_t *usbdev,
                                             uint8_t endpoint,
                                             dif_usbdev_tx_status_t *status);

/**
 * Set the address of a USB device.
 *
 * @param usbdev A USB device.
 * @param addr New address. Only the last 7 bits are significant.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_address_set(dif_usbdev_t *usbdev, uint8_t addr);

/**
 * Get the address of a USB device.
 *
 * @param usbdev A USB device.
 * @param[out] addr Current address.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_address_get(dif_usbdev_t *usbdev, uint8_t *addr);

/**
 * Get USB frame index.
 *
 * @param usbdev A USB device.
 * @param[out] frame_index USB frame index.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_frame(dif_usbdev_t *usbdev,
                                                uint16_t *frame_index);

/**
 * Check if the host is lost.
 *
 * The host is lost if the link is still active but a start of frame packet has
 * not been received in the last 4.096ms.
 *
 * @param usbdev A USB device.
 * @param[out] host_lost Status of the host. `true` if the host is lost, `false`
 * otherwise.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_host_lost(dif_usbdev_t *usbdev,
                                                    bool *host_lost);

/**
 * USB link state.
 */
typedef enum dif_usbdev_link_state {
  kDifUsbdevLinkStateDisconnected,
  kDifUsbdevLinkStatePowered,
  kDifUsbdevLinkStatePoweredSuspend,
  kDifUsbdevLinkStateActive,
  kDifUsbdevLinkStateSuspend,
} dif_usbdev_link_state_t;

/**
 * Get USB link state.
 *
 * @param usbdev A USB device.
 * @param[out] link_state USB link state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_link_state(
    dif_usbdev_t *usbdev, dif_usbdev_link_state_t *link_state);

/**
 * Get the state of the sense pin.
 *
 * @param usbdev A USB device.
 * @param[out] sense State of the sense pin. `true` if the host is providing
 * VBUS, `false` otherwise.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_sense(dif_usbdev_t *usbdev,
                                                bool *sense);

/**
 * Get the depth of the AV FIFO.
 *
 * See also: `dif_usbdev_fill_available_fifo`.
 *
 * @param usbdev A USB device.
 * @param[out] depth Depth of the AV FIFO.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_available_fifo_depth(
    dif_usbdev_t *usbdev, uint8_t *depth);
/**
 * Check if AV FIFO is full.
 *
 * See also: `dif_usbdev_fill_available_fifo`.
 *
 * @param usbdev A USB device.
 * @param[out] is_full State of the AV FIFO. `true` if full, false otherwise.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_available_fifo_full(
    dif_usbdev_t *usbdev, bool *is_full);
/**
 * Get the depth of the RX FIFO.
 *
 * See also: `dif_usbdev_recv`.
 *
 * @param usbdev A USB device.
 * @param[out] depth Depth of the RX FIFO.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_rx_fifo_depth(dif_usbdev_t *usbdev,
                                                        uint8_t *depth);

/**
 * Check if the RX FIFO is empty.
 *
 * See also: `dif_usbdev_recv`.
 *
 * @param usbdev A USB device.
 * @param[out] is_empty State of the RX FIFO. `true` if empty, `false`
 * otherwise.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_status_get_rx_fifo_empty(dif_usbdev_t *usbdev,
                                                        bool *is_empty);

/**
 * USB device interrupts.
 */
typedef enum dif_usbdev_irq {
  /**
   * \internal First USB device interrupt.
   */
  kDifUsbdevIrqFirst,
  /**
   * A packet was received as part of an OUT or SETUP transaction.
   */
  kDifUsbdevIrqPktReceived = kDifUsbdevIrqFirst,
  /**
   * A packet was sent as part of an IN transaction.
   */
  kDifUsbdevIrqPktSent,
  /**
   * VBUS was lost and the link was disconnected.
   */
  kDifUsbdevIrqDisconnected,
  /**
   * A Start-of-Frame (SOF) packet was not received on an active link
   * for 4.096 ms. The host must send a SOF packet every 1 ms.
   */
  kDifUsbdevIrqHostLost,
  /**
   * Link was reset by the host.
   */
  kDifUsbdevIrqLinkReset,
  /**
   * Link was suspended by the host.
   */
  kDifUsbdevIrqLinkSuspend,
  /**
   * Link became active again after being suspended.
   */
  kDifUsbdevIrqLinkResume,
  /**
   * Available buffer FIFO was empty.
   */
  kDifUsbdevIrqAvEmpty,
  /**
   * Received buffer FIFO was full.
   */
  kDifUsbdevIrqRxFull,
  /**
   * A write was done to available buffer FIFO when it was full.
   */
  kDifUsbdevIrqAvOverflow,
  /**
   * The ACK packet expected in response to an IN transaction was
   * not received.
   */
  kDifUsbdevIrqLinkInError,
  /**
   * A CRC error occurred.
   */
  kDifUsbdevIrqRxCrcError,
  /**
   * A packet with an invalid packet identifier (PID) was received.
   */
  kDifUsbdevIrqRxPidError,
  /**
   * A packet with invalid bitstuffing was received.
   */
  kDifUsbdevIrqRxBitstuffError,
  /**
   * USB frame number was updated with a valid SOF packet.
   */
  kDifUsbdevIrqFrame,
  /**
   * VBUS was detected.
   */
  kDifUsbdevIrqConnected,
  /**
   * \internal Last USB device interrupt.
   */
  kDifUsbdevIrqLast = kDifUsbdevIrqConnected
} dif_usbdev_irq_t;

/**
 * Enable or disable an interrupt.
 *
 * @param usbdev A USB device.
 * @param irq An interrupt.
 * @param state New state of the interrupt.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_enable(dif_usbdev_t *usbdev,
                                          dif_usbdev_irq_t irq,
                                          dif_usbdev_toggle_t state);

/**
 * Check if there is a pending request for an interrupt.
 *
 * @param usbdev A USB device.
 * @param irq An interrupt.
 * @param[out] state State of the interrupt.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_get(dif_usbdev_t *usbdev,
                                       dif_usbdev_irq_t irq, bool *state);

/**
 * Clear an interrupt.
 *
 * @param usbdev A USB device.
 * @param irq An interrupt.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_clear(dif_usbdev_t *usbdev,
                                         dif_usbdev_irq_t irq);

/**
 * Clear all pending interrupts.
 *
 * @param usbdev A USB device.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_clear_all(dif_usbdev_t *usbdev);

/**
 * Disable all interrupts and optionally return the current interrupt
 * configuration.
 *
 * @param usbdev A USB device.
 * @param[out] cur_config Current interrupt configuration.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_disable_all(dif_usbdev_t *usbdev,
                                               uint32_t *cur_config);

/**
 * Restore interrupt configuration.
 *
 * @param usbdev A USB device.
 * @param new_config New interrupt configuration.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_restore(dif_usbdev_t *usbdev,
                                           uint32_t new_config);

/**
 * Test an interrupt.
 *
 * @param usbdev A USB device.
 * @param irq An interrupt.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_usbdev_result_t dif_usbdev_irq_test(dif_usbdev_t *usbdev,
                                        dif_usbdev_irq_t irq);

#ifdef __cplusplus
}  // extern "C"
#endif  // __cplusplus

#endif  // OPENTITAN_SW_DEVICE_LIB_DIF_DIF_USBDEV_H_