// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

`include "prim_assert.sv"

/**
 * OTBN Controller
 */
module otbn_controller
  import otbn_pkg::*;
#(
  // Size of the instruction memory, in bytes
  parameter int ImemSizeByte = 4096,
  // Size of the data memory, in bytes
  parameter int DmemSizeByte = 4096,

  localparam int ImemAddrWidth = prim_util_pkg::vbits(ImemSizeByte),
  localparam int DmemAddrWidth = prim_util_pkg::vbits(DmemSizeByte)
) (
  input  logic  clk_i,
  input  logic  rst_ni,

  input  logic  start_i, // start the processing at start_addr_i
  output logic  done_o,  // processing done, signaled by ECALL or error occurring

  output err_bits_t err_bits_o, // valid when done_o is asserted

  input  logic [ImemAddrWidth-1:0] start_addr_i,

  // Next instruction selection (to instruction fetch)
  output logic                     insn_fetch_req_valid_o,
  output logic [ImemAddrWidth-1:0] insn_fetch_req_addr_o,
  // Error from fetch requested last cycle
  input  logic                     insn_fetch_err_i,

  // Fetched/decoded instruction
  input  logic                     insn_valid_i,
  input  logic                     insn_illegal_i,
  input  logic [ImemAddrWidth-1:0] insn_addr_i,

  // Decoded instruction data
  input insn_dec_base_t       insn_dec_base_i,
  input insn_dec_bignum_t     insn_dec_bignum_i,
  input insn_dec_shared_t     insn_dec_shared_i,

  // Base register file
  output logic [4:0]               rf_base_wr_addr_o,
  output logic                     rf_base_wr_en_o,
  output logic                     rf_base_wr_commit_o,
  output logic [31:0]              rf_base_wr_data_no_intg_o,
  output logic [BaseIntgWidth-1:0] rf_base_wr_data_intg_o,
  output logic                     rf_base_wr_data_intg_sel_o,

  output logic [4:0]               rf_base_rd_addr_a_o,
  output logic                     rf_base_rd_en_a_o,
  input  logic [BaseIntgWidth-1:0] rf_base_rd_data_a_intg_i,
  output logic [4:0]               rf_base_rd_addr_b_o,
  output logic                     rf_base_rd_en_b_o,
  input  logic [BaseIntgWidth-1:0] rf_base_rd_data_b_intg_i,
  output logic                     rf_base_rd_commit_o,

  input  logic         rf_base_call_stack_err_i,
  input  logic         rf_base_rd_data_err_i,

  // Bignum register file (WDRs)
  output logic [4:0]         rf_bignum_wr_addr_o,
  output logic [1:0]         rf_bignum_wr_en_o,
  output logic [WLEN-1:0]    rf_bignum_wr_data_no_intg_o,
  output logic [ExtWLEN-1:0] rf_bignum_wr_data_intg_o,
  output logic               rf_bignum_wr_data_intg_sel_o,

  output logic [4:0]         rf_bignum_rd_addr_a_o,
  output logic               rf_bignum_rd_en_a_o,
  input  logic [ExtWLEN-1:0] rf_bignum_rd_data_a_intg_i,

  output logic [4:0]         rf_bignum_rd_addr_b_o,
  output logic               rf_bignum_rd_en_b_o,
  input  logic [ExtWLEN-1:0] rf_bignum_rd_data_b_intg_i,

  input  logic               rf_bignum_rd_data_err_i,

  // Execution units

  // Base ALU
  output alu_base_operation_t  alu_base_operation_o,
  output alu_base_comparison_t alu_base_comparison_o,
  input  logic [31:0]          alu_base_operation_result_i,
  input  logic                 alu_base_comparison_result_i,

  // Bignum ALU
  output alu_bignum_operation_t alu_bignum_operation_o,
  input  logic [WLEN-1:0]       alu_bignum_operation_result_i,
  input  logic                  alu_bignum_selection_flag_i,

  // Bignum MAC
  output mac_bignum_operation_t mac_bignum_operation_o,
  input  logic [WLEN-1:0]       mac_bignum_operation_result_i,
  output logic                  mac_bignum_en_o,

  // LSU
  output logic                     lsu_load_req_o,
  output logic                     lsu_store_req_o,
  output insn_subset_e             lsu_req_subset_o,
  output logic [DmemAddrWidth-1:0] lsu_addr_o,

  output logic [BaseIntgWidth-1:0] lsu_base_wdata_o,
  output logic [ExtWLEN-1:0]       lsu_bignum_wdata_o,

  input  logic [BaseIntgWidth-1:0] lsu_base_rdata_i,
  input  logic [ExtWLEN-1:0]       lsu_bignum_rdata_i,
  input  logic                     lsu_rdata_err_i,

  // Internal Special-Purpose Registers (ISPRs)
  output ispr_e                       ispr_addr_o,
  output logic [31:0]                 ispr_base_wdata_o,
  output logic [BaseWordsPerWLEN-1:0] ispr_base_wr_en_o,
  output logic [WLEN-1:0]             ispr_bignum_wdata_o,
  output logic                        ispr_bignum_wr_en_o,
  input  logic [WLEN-1:0]             ispr_rdata_i,

  output logic rnd_req_o,
  output logic rnd_prefetch_req_o,
  input  logic rnd_valid_i,

  input  logic        state_reset_i,
  output logic [31:0] insn_cnt_o
);
  otbn_state_e state_q, state_d, state_raw;

  logic err;
  logic done_complete;

  logic insn_fetch_req_valid_raw;

  logic stall;
  logic ispr_stall;
  logic mem_stall;
  logic branch_taken;
  logic insn_executing;
  logic [ImemAddrWidth-1:0] branch_target;
  logic                     branch_target_overflow;
  logic [ImemAddrWidth:0]   next_insn_addr_wide;
  logic [ImemAddrWidth-1:0] next_insn_addr;

  csr_e                                csr_addr;
  logic [$clog2(BaseWordsPerWLEN)-1:0] csr_sub_addr;
  logic [31:0]                         csr_rdata_raw;
  logic [31:0]                         csr_rdata;
  logic [BaseWordsPerWLEN-1:0]         csr_rdata_mux [32];
  logic [31:0]                         csr_wdata_raw;
  logic [31:0]                         csr_wdata;

  wsr_e                                wsr_addr;
  logic [WLEN-1:0]                     wsr_wdata;

  ispr_e                               ispr_addr_base;
  logic [$clog2(BaseWordsPerWLEN)-1:0] ispr_word_addr_base;
  logic [BaseWordsPerWLEN-1:0]         ispr_word_sel_base;

  ispr_e                               ispr_addr_bignum;

  logic                                ispr_wr_insn, ispr_rd_insn;
  logic                                ispr_wr_base_insn;
  logic                                ispr_wr_bignum_insn;

  logic lsu_load_req_raw;
  logic lsu_store_req_raw;

  // Register read data with integrity stripped off
  logic [31:0]     rf_base_rd_data_a_no_intg;
  logic [31:0]     rf_base_rd_data_b_no_intg;
  logic [WLEN-1:0] rf_bignum_rd_data_a_no_intg;
  logic [WLEN-1:0] rf_bignum_rd_data_b_no_intg;

  logic [ExtWLEN-1:0] selection_result;

  // Computed increments for indirect register index and memory address in BN.LID/BN.SID/BN.MOVR
  // instructions.
  logic [5:0]  rf_base_rd_data_a_inc;
  logic [5:0]  rf_base_rd_data_b_inc;
  logic [26:0] rf_base_rd_data_a_wlen_word_inc;

  // Output of mux taking the above increments as inputs and choosing one to write back to base
  // register file with appropriate zero extension and padding to give a 32-bit result.
  logic [31:0]              increment_out;

  // Loop control, used to start a new loop
  logic        loop_start_req;
  logic        loop_start_commit;
  logic [11:0] loop_bodysize;
  logic [31:0] loop_iterations;

  // Loop generated jumps. The loop controller asks to jump when execution reaches the end of a loop
  // body that hasn't completed all of its iterations.
  logic                     loop_jump;
  logic [ImemAddrWidth-1:0] loop_jump_addr;

  logic [WLEN-1:0] mac_bignum_rf_wr_data;

  logic csr_illegal_addr, wsr_illegal_addr, ispr_illegal_addr;
  logic imem_addr_err, loop_err, ispr_err;
  logic dmem_addr_err, dmem_addr_unaligned_base, dmem_addr_unaligned_bignum, dmem_addr_overflow;

  logic rf_a_indirect_err, rf_b_indirect_err, rf_d_indirect_err, rf_indirect_err;

  logic insn_cnt_en;
  logic [31:0] insn_cnt_d, insn_cnt_q;

  // Stall a cycle on loads to allow load data writeback to happen the following cycle. Stall not
  // required on stores as there is no response to deal with.
  // TODO: Possibility of error response on store? Probably still don't need to stall in that case
  // just ensure incoming store error stops anything else happening.
  assign mem_stall = lsu_load_req_raw;

  // Reads to RND must stall until data is available
  assign ispr_stall = rnd_req_o & ~rnd_valid_i;

  assign stall = mem_stall | ispr_stall;

  // OTBN is done (raising the 'done' interrupt) either when it executes an ecall or an error
  // occurs. The ecall triggered done is factored out as `done_complete` to avoid logic loops in the
  // error handling logic.
  assign done_complete = (insn_valid_i && insn_dec_shared_i.ecall_insn);
  assign done_o = done_complete | err;

  // Branch taken when there is a valid branch instruction and comparison passes or a valid jump
  // instruction (which is always taken)
  assign branch_taken = insn_valid_i &
                        ((insn_dec_shared_i.branch_insn & alu_base_comparison_result_i) |
                         insn_dec_shared_i.jump_insn);
  // Branch target computed by base ALU (PC + imm)
  assign branch_target = alu_base_operation_result_i[ImemAddrWidth-1:0];
  assign branch_target_overflow = |alu_base_operation_result_i[31:ImemAddrWidth];

  assign next_insn_addr_wide = {1'b0, insn_addr_i} + 'd4;
  assign next_insn_addr = next_insn_addr_wide[ImemAddrWidth-1:0];

  always_comb begin
    // `state_raw` and `insn_fetch_req_valid_raw` are the values of `state_d` and
    // `insn_fetch_req_valid_o` before any errors are considered.
    state_raw                = state_q;
    insn_fetch_req_valid_raw = 1'b0;
    insn_fetch_req_addr_o    = start_addr_i;

    // TODO: Harden state machine
    // TODO: Jumps/branches
    unique case (state_q)
      OtbnStateHalt: begin
        if (start_i) begin
          state_raw = OtbnStateRun;

          insn_fetch_req_addr_o    = start_addr_i;
          insn_fetch_req_valid_raw = 1'b1;
        end
      end
      OtbnStateRun: begin
        insn_fetch_req_valid_raw = 1'b1;

        if (done_complete) begin
          state_raw                = OtbnStateHalt;
          insn_fetch_req_valid_raw = 1'b0;
        end else begin
          // When stalling refetch the same instruction to keep decode inputs constant
          if (stall) begin
            state_raw             = OtbnStateStall;
            insn_fetch_req_addr_o = insn_addr_i;
          end else begin
            if (branch_taken) begin
              insn_fetch_req_addr_o = branch_target;
            end else if (loop_jump) begin
              insn_fetch_req_addr_o = loop_jump_addr;
            end else begin
              insn_fetch_req_addr_o = next_insn_addr;
            end
          end
        end
      end
      OtbnStateStall: begin
        insn_fetch_req_valid_raw = 1'b1;

        // When stalling refetch the same instruction to keep decode inputs constant
        if (stall) begin
          state_raw             = OtbnStateStall;
          insn_fetch_req_addr_o = insn_addr_i;
        end else begin
          if (loop_jump) begin
            insn_fetch_req_addr_o = loop_jump_addr;
          end else begin
            insn_fetch_req_addr_o = next_insn_addr;
          end

          state_raw = OtbnStateRun;
        end
      end
      default: ;
    endcase
  end

  // Anything that moves us or keeps us in the stall state should cause `stall` to be asserted
  `ASSERT(StallIfNextStateStall, insn_valid_i & (state_d == OtbnStateStall) |-> stall)

  // On any error immediately halt and suppress any Imem request.
  assign state_d = err ? OtbnStateHalt : state_raw;
  assign insn_fetch_req_valid_o = err ? 1'b0 : insn_fetch_req_valid_raw;

  // Determine if there are any errors related to the Imem fetch address.
  always_comb begin
    imem_addr_err = 1'b0;

    if (insn_fetch_req_valid_raw) begin
      if (|insn_fetch_req_addr_o[1:0]) begin
        // Imem address is unaligned
        imem_addr_err = 1'b1;
      end else if (branch_taken) begin
        imem_addr_err = branch_target_overflow;
      end else begin
        imem_addr_err = next_insn_addr_wide[ImemAddrWidth];
      end
    end
  end

  assign err_bits_o.fatal_reg     = rf_base_rd_data_err_i | rf_bignum_rd_data_err_i;
  assign err_bits_o.fatal_imem    = insn_fetch_err_i;
  assign err_bits_o.fatal_dmem    = lsu_rdata_err_i;
  assign err_bits_o.illegal_insn  = insn_illegal_i | ispr_err | rf_indirect_err;
  assign err_bits_o.bad_data_addr = dmem_addr_err;
  assign err_bits_o.loop          = loop_err;
  assign err_bits_o.call_stack    = rf_base_call_stack_err_i;
  assign err_bits_o.bad_insn_addr = imem_addr_err;

  assign err = |err_bits_o;

  // Instructions must not execute if there is an error
  assign insn_executing = insn_valid_i & ~err;

  `ASSERT(ErrBitSetOnErr, err |-> |err_bits_o)

  `ASSERT(ControllerStateValid, state_q inside {OtbnStateHalt, OtbnStateRun,
                                                OtbnStateStall})
  // Branch only takes effect in OtbnStateRun so must not go into stall state for branch
  // instructions.
  `ASSERT(NoStallOnBranch,
      insn_valid_i & insn_dec_shared_i.branch_insn |-> state_q != OtbnStateStall)

  always_ff @(posedge clk_i or negedge rst_ni) begin
    if (!rst_ni) begin
      state_q <= OtbnStateHalt;
    end else begin
      state_q <= state_d;
    end
  end

  assign insn_cnt_d = state_reset_i ? 32'd0 : (insn_cnt_q + 32'd1);
  assign insn_cnt_en = (insn_executing & ~stall & (insn_cnt_q != 32'hffffffff)) | state_reset_i;
  assign insn_cnt_o = insn_cnt_q;

  always_ff @(posedge clk_i or negedge rst_ni) begin
    if (!rst_ni) begin
      insn_cnt_q <= 32'd0;
    end else if (insn_cnt_en) begin
      insn_cnt_q <= insn_cnt_d;
    end
  end

  otbn_loop_controller #(
    .ImemAddrWidth(ImemAddrWidth)
  ) u_otbn_loop_controller (
    .clk_i,
    .rst_ni,

    .state_reset_i,

    .insn_valid_i,
    .insn_addr_i,
    .next_insn_addr_i    (next_insn_addr),

    .loop_start_req_i    (loop_start_req),
    .loop_start_commit_i (loop_start_commit),
    .loop_bodysize_i     (loop_bodysize),
    .loop_iterations_i   (loop_iterations),

    .loop_jump_o         (loop_jump),
    .loop_jump_addr_o    (loop_jump_addr),
    .loop_err_o          (loop_err),

    .branch_taken_i      (branch_taken),
    .otbn_stall_i        (stall)
  );

  // loop_start_req indicates the instruction wishes to start a loop, loop_start_commit confirms it
  // should occur.
  assign loop_start_req    = insn_valid_i & insn_dec_shared_i.loop_insn;
  assign loop_start_commit = insn_executing;
  assign loop_bodysize     = insn_dec_base_i.loop_bodysize;
  assign loop_iterations   = insn_dec_base_i.loop_immediate ? insn_dec_base_i.i :
                                                              rf_base_rd_data_a_no_intg;

  // Compute increments which can be optionally applied to indirect register accesses and memory
  // addresses in BN.LID/BN.SID/BN.MOVR instructions.
  assign rf_base_rd_data_a_inc           = rf_base_rd_data_a_no_intg[4:0] + 1'b1;
  assign rf_base_rd_data_b_inc           = rf_base_rd_data_b_no_intg[4:0] + 1'b1;
  // We can avoid a full 32-bit adder here because the offset is 32-bit aligned, so we know the
  // load/store address will only be valid if rf_base_rd_data_a_no_intg[4:0] is zero.
  assign rf_base_rd_data_a_wlen_word_inc = rf_base_rd_data_a_no_intg[31:5] + 27'h1;

  // Choose increment to write back to base register file, only one increment can be written as
  // there is only one write port. Note that where an instruction is incrementing the indirect
  // reference to its destination register (insn_dec_bignum_i.d_inc) that reference is read on the
  // B read port so the B increment is written back.
  always_comb begin
    unique case (1'b1)
      insn_dec_bignum_i.a_inc: begin
        increment_out = {26'b0, rf_base_rd_data_a_inc};
      end
      insn_dec_bignum_i.b_inc: begin
        increment_out = {26'b0, rf_base_rd_data_b_inc};
      end
      insn_dec_bignum_i.d_inc: begin
        increment_out = {26'b0, rf_base_rd_data_b_inc};
      end
      insn_dec_bignum_i.a_wlen_word_inc: begin
        increment_out = {rf_base_rd_data_a_wlen_word_inc, 5'b0};
      end
      default: begin
        // Whenever increment_out is written back to the register file, exactly one of the
        // increment selector signals is high. To prevent the automatic inference of latches in
        // case nothing is written back (rf_wdata_sel != RfWdSelIncr) and to save logic, we choose
        // a valid output as default.
        increment_out = {26'b0, rf_base_rd_data_a_inc};
      end
    endcase
  end

  always_comb begin
    rf_base_rd_addr_a_o = insn_dec_base_i.a;
    rf_base_rd_addr_b_o = insn_dec_base_i.b;
    rf_base_wr_addr_o   = insn_dec_base_i.d;

    // Errors prevent reads from committing (in particular from popping the call stack)
    rf_base_rd_commit_o = ~err;

    rf_base_rd_en_a_o   = 1'b0;
    rf_base_rd_en_b_o   = 1'b0;

    if (insn_valid_i) begin
      if (insn_dec_shared_i.st_insn) begin
        // For stores, both base reads happen in the same cycle as the request because they give the
        // address and data, which make up the request.
        rf_base_rd_en_a_o   = insn_dec_base_i.rf_ren_a & (lsu_load_req_raw | lsu_store_req_raw);
        rf_base_rd_en_b_o   = insn_dec_base_i.rf_ren_b & (lsu_load_req_raw | lsu_store_req_raw);
      end else if (insn_dec_shared_i.ld_insn) begin
        // For loads, the A read happens in the same cycle as the request, giving the address from
        // which to load. The B read is only used for BN.LID and should take place when the
        // instruction is unstalled, giving the index of the register to write the result to.
        rf_base_rd_en_a_o   = insn_dec_base_i.rf_ren_a & (lsu_load_req_raw | lsu_store_req_raw);
        rf_base_rd_en_b_o   = insn_dec_base_i.rf_ren_b & ~stall;
      end else begin
        // For all other instructions the read happens when the instruction is unstalled.
        rf_base_rd_en_a_o   = insn_dec_base_i.rf_ren_a & ~stall;
        rf_base_rd_en_b_o   = insn_dec_base_i.rf_ren_b & ~stall;
      end
    end

    if (insn_dec_shared_i.subset == InsnSubsetBignum) begin
      unique case (1'b1)
        insn_dec_bignum_i.a_inc,
        insn_dec_bignum_i.a_wlen_word_inc: begin
          rf_base_wr_addr_o = insn_dec_base_i.a;
        end

        insn_dec_bignum_i.b_inc,
        insn_dec_bignum_i.d_inc: begin
          rf_base_wr_addr_o = insn_dec_base_i.b;
        end
        default: ;
      endcase
    end
  end

  // Base ALU Operand A MUX
  always_comb begin
    unique case (insn_dec_base_i.op_a_sel)
      OpASelRegister: alu_base_operation_o.operand_a = rf_base_rd_data_a_no_intg;
      OpASelZero:     alu_base_operation_o.operand_a = '0;
      OpASelCurrPc:   alu_base_operation_o.operand_a = {{(32 - ImemAddrWidth){1'b0}}, insn_addr_i};
      default:        alu_base_operation_o.operand_a = rf_base_rd_data_a_no_intg;
    endcase
  end

  // Base ALU Operand B MUX
  always_comb begin
    unique case (insn_dec_base_i.op_b_sel)
      OpBSelRegister:  alu_base_operation_o.operand_b = rf_base_rd_data_b_no_intg;
      OpBSelImmediate: alu_base_operation_o.operand_b = insn_dec_base_i.i;
      default:         alu_base_operation_o.operand_b = rf_base_rd_data_b_no_intg;
    endcase
  end

  assign alu_base_operation_o.op = insn_dec_base_i.alu_op;

  assign alu_base_comparison_o.operand_a = rf_base_rd_data_a_no_intg;
  assign alu_base_comparison_o.operand_b = rf_base_rd_data_b_no_intg;
  assign alu_base_comparison_o.op = insn_dec_base_i.comparison_op;

  assign rf_base_rd_data_a_no_intg = rf_base_rd_data_a_intg_i[31:0];
  assign rf_base_rd_data_b_no_intg = rf_base_rd_data_b_intg_i[31:0];

  // TODO: For now integrity bits from RF base are ignored in the controller, remove this when end
  // to end integrity features that use them are implemented
  logic unused_rf_base_rd_a_intg_bits;
  logic unused_rf_base_rd_b_intg_bits;

  assign unused_rf_base_rd_a_intg_bits = |rf_base_rd_data_a_intg_i[38:32];
  assign unused_rf_base_rd_b_intg_bits = |rf_base_rd_data_b_intg_i[38:32];

  // Register file write MUX
  // Only enable writes when unstalled
  assign rf_base_wr_en_o = insn_valid_i & insn_dec_base_i.rf_we & ~stall;
  assign rf_base_wr_commit_o = insn_executing & ~err;

  always_comb begin
    // Write data mux for anything that needs integrity computing during register write
    unique case (insn_dec_base_i.rf_wdata_sel)
      RfWdSelEx:     rf_base_wr_data_no_intg_o = alu_base_operation_result_i;
      RfWdSelNextPc: rf_base_wr_data_no_intg_o = {{(32-(ImemAddrWidth+1)){1'b0}},
                                                  next_insn_addr_wide};
      RfWdSelIspr:   rf_base_wr_data_no_intg_o = csr_rdata;
      RfWdSelIncr:   rf_base_wr_data_no_intg_o = increment_out;
      default:       rf_base_wr_data_no_intg_o = alu_base_operation_result_i;
    endcase

    // Write data mux for anything that provides its own integrity
    unique case (insn_dec_base_i.rf_wdata_sel)
      RfWdSelLsu: begin
        rf_base_wr_data_intg_sel_o = 1'b1;
        rf_base_wr_data_intg_o     = lsu_base_rdata_i;
      end
      default: begin
        rf_base_wr_data_intg_sel_o = 1'b0;
        rf_base_wr_data_intg_o     = '0;
      end
    endcase
  end

  for (genvar i = 0; i < BaseWordsPerWLEN; ++i) begin : g_rf_bignum_rd_data
    assign rf_bignum_rd_data_a_no_intg[i * 32 +: 32] = rf_bignum_rd_data_a_intg_i[i * 39 +: 32];
    assign rf_bignum_rd_data_b_no_intg[i * 32 +: 32] = rf_bignum_rd_data_b_intg_i[i * 39 +: 32];
  end

  assign rf_bignum_rd_addr_a_o = insn_dec_bignum_i.rf_a_indirect ? rf_base_rd_data_a_no_intg[4:0] :
                                                                   insn_dec_bignum_i.a;
  assign rf_bignum_rd_en_a_o = insn_dec_bignum_i.rf_ren_a & insn_valid_i;

  assign rf_bignum_rd_addr_b_o = insn_dec_bignum_i.rf_b_indirect ? rf_base_rd_data_b_no_intg[4:0] :
                                                                   insn_dec_bignum_i.b;
  assign rf_bignum_rd_en_b_o = insn_dec_bignum_i.rf_ren_b & insn_valid_i;

  assign alu_bignum_operation_o.operand_a = rf_bignum_rd_data_a_no_intg;

  // Base ALU Operand B MUX
  always_comb begin
    unique case (insn_dec_bignum_i.alu_op_b_sel)
      OpBSelRegister:  alu_bignum_operation_o.operand_b = rf_bignum_rd_data_b_no_intg;
      OpBSelImmediate: alu_bignum_operation_o.operand_b = insn_dec_bignum_i.i;
      default:         alu_bignum_operation_o.operand_b = rf_bignum_rd_data_b_no_intg;
    endcase
  end

  assign alu_bignum_operation_o.op          = insn_dec_bignum_i.alu_op;
  assign alu_bignum_operation_o.shift_right = insn_dec_bignum_i.alu_shift_right;
  assign alu_bignum_operation_o.shift_amt   = insn_dec_bignum_i.alu_shift_amt;
  assign alu_bignum_operation_o.flag_group  = insn_dec_bignum_i.alu_flag_group;
  assign alu_bignum_operation_o.sel_flag    = insn_dec_bignum_i.alu_sel_flag;
  assign alu_bignum_operation_o.alu_flag_en = insn_dec_bignum_i.alu_flag_en & insn_executing;
  assign alu_bignum_operation_o.mac_flag_en = insn_dec_bignum_i.mac_flag_en & insn_executing;

  assign mac_bignum_operation_o.operand_a         = rf_bignum_rd_data_a_no_intg;
  assign mac_bignum_operation_o.operand_b         = rf_bignum_rd_data_b_no_intg;
  assign mac_bignum_operation_o.operand_a_qw_sel  = insn_dec_bignum_i.mac_op_a_qw_sel;
  assign mac_bignum_operation_o.operand_b_qw_sel  = insn_dec_bignum_i.mac_op_b_qw_sel;
  assign mac_bignum_operation_o.wr_hw_sel_upper   = insn_dec_bignum_i.mac_wr_hw_sel_upper;
  assign mac_bignum_operation_o.pre_acc_shift_imm = insn_dec_bignum_i.mac_pre_acc_shift;
  assign mac_bignum_operation_o.zero_acc          = insn_dec_bignum_i.mac_zero_acc;
  assign mac_bignum_operation_o.shift_acc         = insn_dec_bignum_i.mac_shift_out;

  assign mac_bignum_en_o = insn_executing & insn_dec_bignum_i.mac_en;

  // Move / Conditional Select. Only select B register data when a selection instruction is being
  // executed and the selection flag isn't set.

  `ASSERT(SelFlagValid, insn_valid_i & insn_dec_bignum_i.sel_insn |->
    insn_dec_bignum_i.alu_sel_flag inside {FlagC, FlagL, FlagM, FlagZ})

  assign selection_result =
    ~insn_dec_bignum_i.sel_insn | alu_bignum_selection_flag_i ? rf_bignum_rd_data_a_intg_i :
                                                                rf_bignum_rd_data_b_intg_i;

  // Bignum Register file write control

  always_comb begin
    // By default write nothing
    rf_bignum_wr_en_o = 2'b00;

    // Only write if executing instruction wants a bignum rf write and it isn't stalled and there is
    // no error
    if (insn_executing && insn_dec_bignum_i.rf_we && !err && !stall) begin
      if (insn_dec_bignum_i.mac_en && insn_dec_bignum_i.mac_shift_out) begin
        // Special handling for BN.MULQACC.SO, only enable upper or lower half depending on
        // mac_wr_hw_sel_upper.
        rf_bignum_wr_en_o = insn_dec_bignum_i.mac_wr_hw_sel_upper ? 2'b10 : 2'b01;
      end else begin
        // For everything else write both halves immediately.
        rf_bignum_wr_en_o = 2'b11;
      end
    end
  end

  assign rf_bignum_wr_addr_o = insn_dec_bignum_i.rf_d_indirect ? rf_base_rd_data_b_no_intg[4:0] :
                                                                 insn_dec_bignum_i.d;


  // For the shift-out variant of BN.MULQACC the bottom half of the MAC result is written to one
  // half of a desintation register specified by the instruction (mac_wr_hw_sel_upper). The bottom
  // half of the MAC result must be placed in the appropriate half of the write data (the RF only
  // accepts write data for the top half in the top half of the write data input). Otherwise
  // (shift-out to bottom half and all other BN.MULQACC instructions) simply pass the MAC result
  // through unchanged as write data.
  assign mac_bignum_rf_wr_data[WLEN-1:WLEN/2] =
      insn_dec_bignum_i.mac_wr_hw_sel_upper &&
      insn_dec_bignum_i.mac_shift_out          ? mac_bignum_operation_result_i[WLEN/2-1:0] :
                                                 mac_bignum_operation_result_i[WLEN-1:WLEN/2];

  assign mac_bignum_rf_wr_data[WLEN/2-1:0] = mac_bignum_operation_result_i[WLEN/2-1:0];

  always_comb begin
    // Write data mux for anything that needs integrity computing during register write
    // TODO: ISPR data will go via direct mux below once integrity has been implemented for
    // them.
    unique case (insn_dec_bignum_i.rf_wdata_sel)
      RfWdSelEx:   rf_bignum_wr_data_no_intg_o = alu_bignum_operation_result_i;
      RfWdSelIspr: rf_bignum_wr_data_no_intg_o = ispr_rdata_i;
      RfWdSelMac:  rf_bignum_wr_data_no_intg_o = mac_bignum_rf_wr_data;
      default:     rf_bignum_wr_data_no_intg_o = alu_bignum_operation_result_i;
    endcase

    // Write data mux for anything that provides its own integrity
    unique case (insn_dec_bignum_i.rf_wdata_sel)
      RfWdSelMovSel: begin
        rf_bignum_wr_data_intg_sel_o = 1'b1;
        rf_bignum_wr_data_intg_o     = selection_result;
      end
      RfWdSelLsu: begin
        rf_bignum_wr_data_intg_sel_o = 1'b1;
        rf_bignum_wr_data_intg_o     = lsu_bignum_rdata_i;
      end
      default: begin
        rf_bignum_wr_data_intg_sel_o = 1'b0;
        rf_bignum_wr_data_intg_o     = '0;
      end
    endcase
  end

  assign rf_a_indirect_err = insn_dec_bignum_i.rf_a_indirect & (|rf_base_rd_data_a_no_intg[31:5]);
  assign rf_b_indirect_err = insn_dec_bignum_i.rf_b_indirect & (|rf_base_rd_data_b_no_intg[31:5]);
  assign rf_d_indirect_err = insn_dec_bignum_i.rf_d_indirect & (|rf_base_rd_data_b_no_intg[31:5]);

  assign rf_indirect_err =
      insn_valid_i & (rf_a_indirect_err | rf_b_indirect_err | rf_d_indirect_err);

  // CSR/WSR/ISPR handling
  // ISPRs (Internal Special Purpose Registers) are the internal registers. CSRs and WSRs are the
  // ISA visible versions of those registers in the base and bignum ISAs respectively.

  assign csr_addr     = csr_e'(insn_dec_base_i.i[11:0]);
  assign csr_sub_addr = insn_dec_base_i.i[$clog2(BaseWordsPerWLEN)-1:0];

  always_comb begin
    ispr_addr_base      = IsprMod;
    ispr_word_addr_base = '0;
    csr_illegal_addr    = 1'b0;

    unique case (csr_addr)
      CsrFlags, CsrFg0, CsrFg1 : begin
        ispr_addr_base      = IsprFlags;
        ispr_word_addr_base = '0;
      end
      CsrMod0, CsrMod1, CsrMod2, CsrMod3, CsrMod4, CsrMod5, CsrMod6, CsrMod7: begin
        ispr_addr_base      = IsprMod;
        ispr_word_addr_base = csr_sub_addr;
      end
      CsrRndPrefetch: begin
        // Reading from RND_PREFETCH results in 0, there is no ISPR to read so no address is set.
        // The csr_rdata mux logic takes care of producing the 0.
      end
      CsrRnd: begin
        ispr_addr_base      = IsprRnd;
        ispr_word_addr_base = '0;
      end
      CsrUrnd: begin
        ispr_addr_base      = IsprUrnd;
        ispr_word_addr_base = '0;
      end
      default: csr_illegal_addr = 1'b1;
    endcase
  end

  for (genvar i_word = 0; i_word < BaseWordsPerWLEN; i_word++) begin : g_ispr_word_sel_base
    assign ispr_word_sel_base[i_word] = ispr_word_addr_base == i_word;
  end

  for (genvar i_bit = 0; i_bit < 32; i_bit++) begin : g_csr_rdata_mux
    for (genvar i_word = 0; i_word < BaseWordsPerWLEN; i_word++) begin : g_csr_rdata_mux_inner
      assign csr_rdata_mux[i_bit][i_word] =
          ispr_rdata_i[i_word*32 + i_bit] & ispr_word_sel_base[i_word];
    end

    assign csr_rdata_raw[i_bit] = |csr_rdata_mux[i_bit];
  end

  // Specialised read data handling for CSR reads where raw read data needs modification.
  always_comb begin
    csr_rdata = csr_rdata_raw;

    unique case (csr_addr)
      // For FG0/FG1 select out appropriate bits from FLAGS ISPR and pad the rest with zeros.
      CsrFg0:         csr_rdata = {28'b0, csr_rdata_raw[3:0]};
      CsrFg1:         csr_rdata = {28'b0, csr_rdata_raw[7:4]};
      CsrRndPrefetch: csr_rdata = '0;
      default: ;
    endcase
  end

  assign csr_wdata_raw = insn_dec_shared_i.ispr_rs_insn ? csr_rdata | rf_base_rd_data_a_no_intg :
                                                          rf_base_rd_data_a_no_intg;

  // Specialised write data handling for CSR writes where raw write data needs modification.
  always_comb begin
    csr_wdata = csr_wdata_raw;

    unique case (csr_addr)
      // For FG0/FG1 only modify relevant part of FLAGS ISPR.
      CsrFg0: csr_wdata = {24'b0, csr_rdata_raw[7:4], csr_wdata_raw[3:0]};
      CsrFg1: csr_wdata = {24'b0, csr_wdata_raw[3:0], csr_rdata_raw[3:0]};
      default: ;
    endcase
  end

  // ISPR RS (read and set) must not be combined with ISPR RD or WR (read or write). ISPR RD and
  // WR (read and write) is allowed.
  `ASSERT(NoIsprRorWAndRs, insn_valid_i |-> ~(insn_dec_shared_i.ispr_rs_insn   &
                                              (insn_dec_shared_i.ispr_rd_insn |
                                               insn_dec_shared_i.ispr_wr_insn)))


  assign wsr_addr = wsr_e'(insn_dec_bignum_i.i[WsrNumWidth-1:0]);

  always_comb begin
    ispr_addr_bignum = IsprMod;
    wsr_illegal_addr = 1'b0;

    unique case (wsr_addr)
      WsrMod:  ispr_addr_bignum = IsprMod;
      WsrRnd:  ispr_addr_bignum = IsprRnd;
      WsrUrnd: ispr_addr_bignum = IsprUrnd;
      WsrAcc:  ispr_addr_bignum = IsprAcc;
      default: wsr_illegal_addr = 1'b1;
    endcase
  end

  assign wsr_wdata = insn_dec_shared_i.ispr_rs_insn ? ispr_rdata_i | rf_bignum_rd_data_a_no_intg :
                                                      rf_bignum_rd_data_a_no_intg;

  assign ispr_illegal_addr = insn_dec_shared_i.subset == InsnSubsetBase ? csr_illegal_addr :
                                                                          wsr_illegal_addr;

  assign ispr_err = ispr_illegal_addr & insn_valid_i & (insn_dec_shared_i.ispr_rd_insn |
                                                        insn_dec_shared_i.ispr_wr_insn |
                                                        insn_dec_shared_i.ispr_rs_insn);

  assign ispr_wr_insn = insn_dec_shared_i.ispr_wr_insn | insn_dec_shared_i.ispr_rs_insn;
  assign ispr_rd_insn = insn_dec_shared_i.ispr_rd_insn | insn_dec_shared_i.ispr_rs_insn;

  // Write to RND_PREFETCH must not produce ISR write
  assign ispr_wr_base_insn =
    ispr_wr_insn & (insn_dec_shared_i.subset == InsnSubsetBase) & (csr_addr != CsrRndPrefetch);

  assign ispr_wr_bignum_insn = ispr_wr_insn & (insn_dec_shared_i.subset == InsnSubsetBignum);

  assign ispr_addr_o         = insn_dec_shared_i.subset == InsnSubsetBase ? ispr_addr_base :
                                                                            ispr_addr_bignum;
  assign ispr_base_wdata_o   = csr_wdata;
  assign ispr_base_wr_en_o   = {BaseWordsPerWLEN{ispr_wr_base_insn & insn_executing}} &
                               ispr_word_sel_base;

  assign ispr_bignum_wdata_o = wsr_wdata;
  assign ispr_bignum_wr_en_o = ispr_wr_bignum_insn & insn_executing;

  // lsu_load_req_raw/lsu_store_req_raw indicate an instruction wishes to perform a store or a load.
  // lsu_load_req_o/lsu_store_req_o factor in whether an instruction is actually executing (it may
  // be suppressed due an error) and command the load or store to happen when asserted.
  assign lsu_load_req_raw = insn_valid_i & insn_dec_shared_i.ld_insn & (state_q == OtbnStateRun);
  assign lsu_load_req_o   = insn_executing & lsu_load_req_raw;

  assign lsu_store_req_raw = insn_valid_i & insn_dec_shared_i.st_insn & (state_q == OtbnStateRun);
  assign lsu_store_req_o   = insn_executing & lsu_store_req_raw;

  assign lsu_req_subset_o = insn_dec_shared_i.subset;

  assign lsu_addr_o         = alu_base_operation_result_i[DmemAddrWidth-1:0];
  assign lsu_base_wdata_o   = rf_base_rd_data_b_intg_i;
  assign lsu_bignum_wdata_o = rf_bignum_rd_data_b_intg_i;

  assign dmem_addr_unaligned_bignum =
      (lsu_req_subset_o == InsnSubsetBignum) & (|lsu_addr_o[$clog2(WLEN/8)-1:0]);
  assign dmem_addr_unaligned_base   =
      (lsu_req_subset_o == InsnSubsetBase)   & (|lsu_addr_o[1:0]);
  assign dmem_addr_overflow         = |alu_base_operation_result_i[31:DmemAddrWidth];

  assign dmem_addr_err =
      insn_valid_i & (lsu_load_req_raw | lsu_store_req_raw) & (dmem_addr_overflow         |
                                                               dmem_addr_unaligned_bignum |
                                                               dmem_addr_unaligned_base);

  assign rnd_req_o = insn_valid_i & ispr_rd_insn & (ispr_addr_o == IsprRnd);

  assign rnd_prefetch_req_o = insn_valid_i & ispr_wr_insn &
      (insn_dec_shared_i.subset == InsnSubsetBase) & (csr_addr == CsrRndPrefetch);
endmodule