// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
// TODO: This module is only a draft implementation that covers most of the clkmgr
// functionality but is incomplete


# CLKMGR register template
#
{
  name: "CLKMGR",
  clocking: [{clock: "clk_i", reset: "rst_ni"}],
  bus_interfaces: [
    { protocol: "tlul", direction: "device" }
  ],
  regwidth: "32",
  param_list: [
    { name: "NumGroups",
      desc: "Number of clock groups",
      type: "int",
      default: "7",
      local: "true"
    },
  ],

  // Define rstmgr struct package
  inter_signal_list: [
    { struct:  "clkmgr_out",
      type:    "uni",
      name:    "clocks",
      act:     "req",
      package: "clkmgr_pkg",
    },

    { struct:  "pwr_clk",
      type:    "req_rsp",
      name:    "pwr",
      act:     "rsp",
    },

    { struct:  "clk_dft",
      type:    "uni",
      name:    "dft",
      act:     "rcv",
      package: "clkmgr_pkg", // This should be moved elsewhere later
    },

    { struct:  "clk_hint_status",
      type:    "uni",
      name:    "status",
      act:     "rcv",
      package: "clkmgr_pkg",
    },
  ],


  registers: [
    { name: "CLK_ENABLES",
      desc: '''
        Clock enable for software gateable clocks.
        These clocks are direclty controlled by software.
      ''',
      swaccess: "rw",
      hwaccess: "hro",
      fields: [
        {
          bits: "0",
          name: "CLK_FIXED_PERI_EN",
          resval: 1,
          desc: '''
            0 CLK_FIXED_PERI is disabled.
            1 CLK_FIXED_PERI is enabled.
          '''
        }
        {
          bits: "1",
          name: "CLK_USB_48MHZ_PERI_EN",
          resval: 1,
          desc: '''
            0 CLK_USB_48MHZ_PERI is disabled.
            1 CLK_USB_48MHZ_PERI is enabled.
          '''
        }
      ]
    },

    { name: "CLK_HINTS",
      desc: '''
        Clock hint for software gateable clocks.
        These clocks are not fully controlled by software.

        For disable, software only provides a hint, and hardware determines the final clock state based on the
        hint and whether the block in question is idle.

      ''',
      swaccess: "rw",
      hwaccess: "hro",
      fields: [
        {
          bits: "0",
          name: "CLK_MAIN_AES_HINT",
          resval: 1,
          desc: '''
            0 CLK_MAIN_AES can be disabled.
            1 CLK_MAIN_AES is enabled.
          '''
        }
        {
          bits: "1",
          name: "CLK_MAIN_HMAC_HINT",
          resval: 1,
          desc: '''
            0 CLK_MAIN_HMAC can be disabled.
            1 CLK_MAIN_HMAC is enabled.
          '''
        }
      ]
    },

    { name: "CLK_HINTS_STATUS",
      desc: '''
        Since the final state of !!CLK_HINTS is not always determined by software,
        this register provides read feedback for the current clock state.

      ''',
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        {
          bits: "0",
          name: "CLK_MAIN_AES_VAL",
          resval: 1,
          desc: '''
            0 CLK_MAIN_AES is disabled.
            1 CLK_MAIN_AES is enabled.
          '''
        }
        {
          bits: "1",
          name: "CLK_MAIN_HMAC_VAL",
          resval: 1,
          desc: '''
            0 CLK_MAIN_HMAC is disabled.
            1 CLK_MAIN_HMAC is enabled.
          '''
        }
      ]
    },
  ]
}