# Copyright lowRISC contributors.
# Licensed under the Apache License, Version 2.0, see LICENSE for details.
# SPDX-License-Identifier: Apache-2.0
r"""
Class describing simulation configuration object
"""

import logging as log
import os
import shutil
import subprocess
import sys
from collections import OrderedDict

from Deploy import CompileSim, CovAnalyze, CovMerge, CovReport, Deploy, RunTest
from FlowCfg import FlowCfg
from Modes import BuildModes, Modes, Regressions, RunModes, Tests
from tabulate import tabulate
from testplanner import class_defs, testplan_utils
from utils import VERBOSE, find_and_substitute_wildcards


def pick_dump_format(fmts):
    '''Choose a supported wave dumping format

    fmts is a list of formats that the chosen tool supports. Return the first
    that we think is possible (e.g. not fsdb if Verdi is not installed).

    '''
    assert fmts
    fmt = fmts[0]
    if fmt == 'fsdb' and not shutil.which('verdi'):
        return pick_dump_format(fmts[1:])

    return fmt


def resolve_dump_format(tool, dump):
    '''Decide on the correct dumping format

    This is called after reading the config file. tool is the chosen tool,
    which will always have been resolved by this point. waves is a boolean
    which determines whether waves should be dumped at all (from the --waves
    argument). dump is the dumping format chosen on the command line or None.

    '''
    assert tool is not None

    SUPPORTED_DUMP_FMTS = {
        'vcs': ['fsdb', 'vpd'],
        'xcelium': ['fsdb', 'shm', 'vpd']
    }

    # Look up which dumping formats the tool supports
    fmts = SUPPORTED_DUMP_FMTS.get(tool)

    if dump is not None:
        # If the user has specified their preferred dumping format, use it. As
        # a sanity check, error out if the chosen tool doesn't support the
        # format, but only if we know about the tool. If not, we'll just assume
        # they know what they're doing.
        if fmts is not None and dump not in fmts:
            log.error('Chosen tool ({}) does not support wave '
                      'dumping format {!r}.'.format(tool, dump))
            sys.exit(1)

        return dump

    # If the user hasn't specified a dumping format, but has asked for waves,
    # we need to decide on a format for them. If fmts is None, we don't know
    # about this tool. Maybe it's a new simulator, in which case, default to
    # VPD and hope for the best.
    if not fmts:
        return 'vpd'

    return pick_dump_format(fmts)


class SimCfg(FlowCfg):
    """Simulation configuration object

    A simulation configuration class holds key information required for building a DV
    regression framework.
    """
    def __init__(self, flow_cfg_file, proj_root, args):
        super().__init__(flow_cfg_file, proj_root, args)
        # Options set from command line
        self.tool = args.tool
        self.build_opts = []
        self.build_opts.extend(args.build_opts)
        self.en_build_modes = args.build_modes.copy()
        self.run_opts = []
        self.run_opts.extend(args.run_opts)
        self.en_run_modes = []
        self.en_run_modes.extend(args.run_modes)
        self.build_unique = args.build_unique
        self.build_only = args.build_only
        self.run_only = args.run_only
        self.reseed_ovrd = args.reseed
        self.reseed_multiplier = args.reseed_multiplier
        self.waves = args.waves
        self.max_waves = args.max_waves
        self.cov = args.cov
        self.cov_merge_previous = args.cov_merge_previous
        self.profile = args.profile or '(cfg uses profile without --profile)'
        self.xprop_off = args.xprop_off
        self.no_rerun = args.no_rerun
        # Single-character verbosity setting (n, l, m, h, d). args.verbosity
        # might be None, in which case we'll pick up a default value from
        # configuration files.
        self.verbosity = args.verbosity
        self.verbose = args.verbose
        self.dry_run = args.dry_run
        self.map_full_testplan = args.map_full_testplan

        # Disable cov if --build-only is passed.
        if self.build_only:
            self.cov = False

        # Set default sim modes for unpacking
        if self.waves is True:
            self.en_build_modes.append("waves")
        if self.cov is True:
            self.en_build_modes.append("cov")
        if args.profile is not None:
            self.en_build_modes.append("profile")
        if self.xprop_off is not True:
            self.en_build_modes.append("xprop")

        # Options built from cfg_file files
        self.project = ""
        self.flow = ""
        self.flow_makefile = ""
        self.build_dir = ""
        self.run_dir = ""
        self.sw_build_dir = ""
        self.pass_patterns = []
        self.fail_patterns = []
        self.name = ""
        self.dut = ""
        self.tb = ""
        self.testplan = ""
        self.fusesoc_core = ""
        self.ral_spec = ""
        self.build_modes = []
        self.run_modes = []
        self.regressions = []

        # Options from tools - for building and running tests
        self.build_cmd = ""
        self.flist_gen_cmd = ""
        self.flist_gen_opts = []
        self.flist_file = ""
        self.run_cmd = ""

        # Generated data structures
        self.links = {}
        self.build_list = []
        self.run_list = []
        self.cov_merge_deploy = None
        self.cov_report_deploy = None
        self.results_summary = OrderedDict()

        # If is_primary_cfg is set, then each cfg will have its own cov_deploy.
        # Maintain an array of those in cov_deploys.
        self.cov_deploys = []

        # Parse the cfg_file file tree
        self._parse_flow_cfg(flow_cfg_file)

        # Choose a dump format now. Note that this has to happen after parsing
        # the configuration format because our choice might depend on the
        # chosen tool.
        self.dump_fmt = (resolve_dump_format(self.tool, args.dump)
                         if self.waves and not self.is_primary_cfg else 'none')

        # If build_unique is set, then add current timestamp to uniquify it
        if self.build_unique:
            self.build_dir += "_" + self.timestamp

        # Process overrides before substituting the wildcards.
        self._process_overrides()

        # Make substitutions, while ignoring the following wildcards
        # TODO: Find a way to set these in sim cfg instead
        ignored_wildcards = [
            "build_mode", "index", "test", "seed", "uvm_test", "uvm_test_seq",
            "cov_db_dirs", "sw_test", "sw_test_is_prebuilt", "sw_build_device"
        ]
        self.__dict__ = find_and_substitute_wildcards(self.__dict__,
                                                      self.__dict__,
                                                      ignored_wildcards,
                                                      self.is_primary_cfg)

        # Set the title for simulation results.
        self.results_title = self.name.upper() + " Simulation Results"

        # Stuff below only pertains to individual cfg (not primary cfg)
        # or individual selected cfgs (if select_cfgs is configured via command line)
        # TODO: find a better way to support select_cfgs
        if not self.is_primary_cfg and (not self.select_cfgs or
                                        self.name in self.select_cfgs):
            # If self.tool is None at this point, there was no --tool argument on
            # the command line, and there is no default tool set in the config
            # file. That's ok if this is a primary config (where the
            # sub-configurations can choose tools themselves), but not otherwise.
            if self.tool is None:
                log.error(
                    'Config file does not specify a default tool, '
                    'and there was no --tool argument on the command line.')
                sys.exit(1)

            # Print info:
            log.info("[scratch_dir]: [%s]: [%s]", self.name, self.scratch_path)

            # Set directories with links for ease of debug / triage.
            self.links = {
                "D": self.scratch_path + "/" + "dispatched",
                "P": self.scratch_path + "/" + "passed",
                "F": self.scratch_path + "/" + "failed",
                "K": self.scratch_path + "/" + "killed"
            }

            # Use the default build mode for tests that do not specify it
            if not hasattr(self, "build_mode"):
                self.build_mode = 'default'

            # Create objects from raw dicts - build_modes, sim_modes, run_modes,
            # tests and regressions, only if not a primary cfg obj
            self._create_objects()

        # Post init checks
        self.__post_init__()

    def __post_init__(self):
        # Run some post init checks
        super().__post_init__()

    def kill(self):
        '''kill running processes and jobs gracefully
        '''
        super().kill()
        for item in self.cov_deploys:
            item.kill()

    # Purge the output directories. This operates on self.
    def _purge(self):
        if self.scratch_path:
            try:
                log.info("Purging scratch path %s", self.scratch_path)
                os.system("/bin/rm -rf " + self.scratch_path)
            except IOError:
                log.error('Failed to purge scratch directory %s',
                          self.scratch_path)

    def _create_objects(self):
        # Create build and run modes objects
        self.build_modes = Modes.create_modes(BuildModes, self.build_modes)
        self.run_modes = Modes.create_modes(RunModes, self.run_modes)

        # Walk through build modes enabled on the CLI and append the opts
        for en_build_mode in self.en_build_modes:
            build_mode_obj = Modes.find_mode(en_build_mode, self.build_modes)
            if build_mode_obj is not None:
                self.build_opts.extend(build_mode_obj.build_opts)
                self.run_opts.extend(build_mode_obj.run_opts)
            else:
                log.error(
                    "Mode \"%s\" enabled on the the command line is not defined",
                    en_build_mode)
                sys.exit(1)

        # Walk through run modes enabled on the CLI and append the opts
        for en_run_mode in self.en_run_modes:
            run_mode_obj = Modes.find_mode(en_run_mode, self.run_modes)
            if run_mode_obj is not None:
                self.run_opts.extend(run_mode_obj.run_opts)
            else:
                log.error(
                    "Mode \"%s\" enabled on the the command line is not defined",
                    en_run_mode)
                sys.exit(1)

        # Create tests from given list of items
        self.tests = Tests.create_tests(self.tests, self)

        # Regressions
        # Parse testplan if provided.
        if self.testplan != "":
            self.testplan = testplan_utils.parse_testplan(self.testplan)
            # Extract tests in each milestone and add them as regression target.
            self.regressions.extend(self.testplan.get_milestone_regressions())
        else:
            # Create a dummy testplan with no entries.
            self.testplan = class_defs.Testplan(name=self.name)

        # Create regressions
        self.regressions = Regressions.create_regressions(
            self.regressions, self, self.tests)

    def _print_list(self):
        for list_item in self.list_items:
            log.info("---- List of %s in %s ----", list_item, self.name)
            if hasattr(self, list_item):
                items = getattr(self, list_item)
                for item in items:
                    log.info(item)
            else:
                log.error("Item %s does not exist!", list_item)

    def _create_build_and_run_list(self):
        # Walk through the list of items to run and create the build and run
        # objects.
        # Allow multiple regressions to run as long as the do not enable
        # sim_modes or run_modes
        def get_overlapping_tests(tests, run_list_names):
            overlapping_tests = []
            for test in tests:
                if test.name in run_list_names:
                    overlapping_tests.append(test)
            return overlapping_tests

        def prune_items(items, marked_items):
            pruned_items = []
            for item in items:
                if item not in marked_items:
                    pruned_items.append(item)
            return pruned_items

        # Check if there are items to run
        if self.items == []:
            log.error(
                "No items provided for running this simulation / regression")
            sys.exit(1)

        items_list = self.items
        run_list_names = []
        marked_items = []
        # Process regressions first
        for regression in self.regressions:
            if regression.name in items_list:
                overlapping_tests = get_overlapping_tests(
                    regression.tests, run_list_names)
                if overlapping_tests != []:
                    log.error(
                        "Regression \"%s\" added for run contains tests that overlap with "
                        "other regressions added. This can result in conflicting "
                        "build / run_opts to be set causing unexpected results.",
                        regression.name)
                    sys.exit(1)

                self.run_list.extend(regression.tests)
                # Merge regression's build and run opts with its tests and their
                # build_modes
                regression.merge_regression_opts()
                run_list_names.extend(regression.test_names)
                marked_items.append(regression.name)
        items_list = prune_items(items_list, marked_items)

        # Process individual tests
        for test in self.tests:
            if test.name in items_list:
                overlapping_tests = get_overlapping_tests([test],
                                                          run_list_names)
                if overlapping_tests == []:
                    self.run_list.append(test)
                    run_list_names.append(test.name)
                    marked_items.append(test.name)
        items_list = prune_items(items_list, marked_items)

        # Merge the global build and run opts
        Tests.merge_global_opts(self.run_list, self.build_opts, self.run_opts)

        # Check if all items have been processed
        if items_list != []:
            log.error(
                "The items %s added for run were not found in \n%s!\n "
                "Use the --list switch to see a list of available "
                "tests / regressions.", items_list, self.flow_cfg_file)

        # Process reseed override and create the build_list
        build_list_names = []
        for test in self.run_list:
            # Override reseed if available.
            if self.reseed_ovrd is not None:
                test.reseed = self.reseed_ovrd

            # Apply reseed multiplier if set on the command line.
            test.reseed *= self.reseed_multiplier

            # Create the unique set of builds needed.
            if test.build_mode.name not in build_list_names:
                self.build_list.append(test.build_mode)
                build_list_names.append(test.build_mode.name)

    def _create_dirs(self):
        '''Create initial set of directories
        '''
        # Invoking system calls has a performance penalty.
        # Construct a single command line chained with '&&' to invoke
        # the system call only once, rather than multiple times.
        create_link_dirs_cmd = ""
        for link in self.links.keys():
            create_link_dirs_cmd += "/bin/rm -rf " + self.links[link] + " && "
            create_link_dirs_cmd += "mkdir -p " + self.links[link] + " && "
        create_link_dirs_cmd += " true"

        try:
            os.system(create_link_dirs_cmd)
        except IOError:
            log.error("Error running when running the cmd \"%s\"",
                      create_link_dirs_cmd)
            sys.exit(1)

    def _expand_run_list(self, build_map):
        '''Generate a list of tests to be run

        For each test in tests, we add it test.reseed times. The ordering is
        interleaved so that we run through all of the tests as soon as
        possible. If there are multiple tests and they have different reseed
        values, they are "fully interleaved" at the start (so if there are
        tests A, B with reseed values of 5 and 2, respectively, then the list
        will be ABABAAA).

        build_map is a dictionary from build name to a CompileSim object. Each
        test is added to the CompileSim item that it depends on (signifying
        that the test should be built once the build on which it depends is
        done).
        '''
        tagged = []
        for test in self.run_list:
            for idx in range(test.reseed):
                tagged.append((idx, test, RunTest(idx, test, self)))

        # Stably sort the tagged list by the 1st coordinate
        tagged.sort(key=lambda x: x[0])

        # Now iterate over it again, adding tests to build_map (in the
        # interleaved order) and collecting up the RunTest objects.
        runs = []
        for _, test, run in tagged:
            build_map[test.build_mode].sub.append(run)
            runs.append(run)

        return runs

    def _create_deploy_objects(self):
        '''Create deploy objects from the build and run lists.
        '''

        # Create the build and run list first
        self._create_build_and_run_list()

        self.builds = []
        build_map = {}
        for build_mode_obj in self.build_list:
            new_build = CompileSim(build_mode_obj, self)

            # It is possible for tests to supply different build modes, but
            # those builds may differ only under specific circumstances, such
            # as coverage being enabled. If coverage is not enabled, then they
            # may be completely identical. In that case, we can save compute
            # resources by removing the extra duplicated builds. We discard the
            # new_build if it is equivalent to an existing one.
            is_unique = True
            for build in self.builds:
                if build.is_equivalent_job(new_build):
                    new_build = build
                    is_unique = False
                    break

            if is_unique:
                self.builds.append(new_build)
            build_map[build_mode_obj] = new_build

        # Update all tests to use the updated (uniquified) build modes.
        for test in self.run_list:
            if test.build_mode.name != build_map[test.build_mode].name:
                test.build_mode = Modes.find_mode(
                    build_map[test.build_mode].name, self.build_modes)

        self.runs = ([]
                     if self.build_only else self._expand_run_list(build_map))

        self.deploy = self.runs if self.run_only else self.builds

        # Create cov_merge and cov_report objects
        if self.cov:
            self.cov_merge_deploy = CovMerge(self)
            self.cov_report_deploy = CovReport(self)
            # Generate reports only if merge was successful; add it as a dependency
            # of merge.
            self.cov_merge_deploy.sub.append(self.cov_report_deploy)

        # Create initial set of directories before kicking off the regression.
        self._create_dirs()

    def create_deploy_objects(self):
        '''Public facing API for _create_deploy_objects().
        '''
        super().create_deploy_objects()

        # Also, create cov_deploys
        if self.cov:
            for item in self.cfgs:
                if item.cov:
                    self.cov_deploys.append(item.cov_merge_deploy)

    # deploy additional commands as needed. We do this separated for coverage
    # since that needs to happen at the end.
    def deploy_objects(self):
        '''This is a public facing API, so we use "self.cfgs" instead of self.
        '''
        # Invoke the base class method to run the regression.
        super().deploy_objects()

        # If coverage is enabled, then deploy the coverage tasks.
        if self.cov:
            Deploy.deploy(self.cov_deploys)

    def _cov_analyze(self):
        '''Use the last regression coverage data to open up the GUI tool to
        analyze the coverage.
        '''
        cov_analyze_deploy = CovAnalyze(self)
        self.deploy = [cov_analyze_deploy]

    def cov_analyze(self):
        '''Public facing API for analyzing coverage.
        '''
        for item in self.cfgs:
            item._cov_analyze()

    def _gen_results(self):
        '''
        The function is called after the regression has completed. It collates the
        status of all run targets and generates a dict. It parses the testplan and
        maps the generated result to the testplan entries to generate a final table
        (list). It also prints the full list of failures for debug / triage. If cov
        is enabled, then the summary coverage report is also generated. The final
        result is in markdown format.
        '''

        # TODO: add support for html
        def retrieve_result(name, results):
            for item in results:
                if name == item["name"]:
                    return item
            return None

        def gen_results_sub(items, results, fail_msgs):
            '''
            Generate the results table from the test runs (builds are ignored).
            The table has 3 columns - name, passing and total as a list of dicts.
            This is populated for all tests. The number of passing and total is
            in reference to the number of iterations or reseeds for that test.
            This list of dicts is directly consumed by the Testplan::results_table
            method for testplan mapping / annotation.
            '''
            for item in items:
                if item.status == "F":
                    fail_msgs += item.fail_msg

                # Generate results table for runs.
                if item.target == "run":
                    result = retrieve_result(item.name, results)
                    if result is None:
                        result = {"name": item.name, "passing": 0, "total": 0}
                        results.append(result)
                    if item.status == "P":
                        result["passing"] += 1
                    result["total"] += 1
                (results, fail_msgs) = gen_results_sub(item.sub, results,
                                                       fail_msgs)
            return (results, fail_msgs)

        regr_results = []
        fail_msgs = ""
        deployed_items = self.deploy
        if self.cov:
            deployed_items.append(self.cov_merge_deploy)
        (regr_results, fail_msgs) = gen_results_sub(deployed_items,
                                                    regr_results, fail_msgs)

        # Add title if there are indeed failures
        if fail_msgs != "":
            fail_msgs = "\n## List of Failures\n" + fail_msgs
            self.errors_seen = True

        # Generate results table for runs.
        results_str = "## " + self.results_title + "\n"
        results_str += "### " + self.timestamp_long + "\n"
        if self.revision_string:
            results_str += "### " + self.revision_string + "\n"

        # Add path to testplan, only if it has entries (i.e., its not dummy).
        if self.testplan.entries:
            if hasattr(self, "testplan_doc_path"):
                testplan = "https://{}/{}".format(self.doc_server,
                                                  self.testplan_doc_path)
            else:
                testplan = "https://{}/{}".format(self.doc_server,
                                                  self.rel_path)
                testplan = testplan.replace("/dv", "/doc/dv_plan/#testplan")

            results_str += "### [Testplan](" + testplan + ")\n"

        results_str += "### Simulator: " + self.tool.upper() + "\n\n"

        if regr_results == []:
            results_str += "No results to display.\n"

        else:
            # Map regr results to the testplan entries.
            results_str += self.testplan.results_table(
                regr_results=regr_results,
                map_full_testplan=self.map_full_testplan)
            results_str += "\n"
            self.results_summary = self.testplan.results_summary

            # Append coverage results of coverage was enabled.
            if self.cov:
                if self.cov_report_deploy.status == "P":
                    results_str += "\n## Coverage Results\n"
                    # Link the dashboard page using "cov_report_page" value.
                    if hasattr(self, "cov_report_page"):
                        results_str += "\n### [Coverage Dashboard]"
                        if self.args.publish:
                            cov_report_page_path = "cov_report"
                        else:
                            cov_report_page_path = self.cov_report_dir
                        cov_report_page_path += "/" + self.cov_report_page
                        results_str += "({})\n\n".format(cov_report_page_path)
                    results_str += self.cov_report_deploy.cov_results
                    self.results_summary[
                        "Coverage"] = self.cov_report_deploy.cov_total
                else:
                    self.results_summary["Coverage"] = "--"

            # append link of detail result to block name
            self.results_summary["Name"] = self._get_results_page_link(
                self.results_summary["Name"])

        # Append failures for triage
        self.results_md = results_str + fail_msgs
        results_str += fail_msgs

        # Write results to the scratch area
        results_file = self.scratch_path + "/results_" + self.timestamp + ".md"
        f = open(results_file, 'w')
        f.write(self.results_md)
        f.close()

        # Return only the tables
        log.info("[results page]: [%s] [%s]", self.name, results_file)
        return results_str

    def gen_results_summary(self):

        # sim summary result has 5 columns from each SimCfg.results_summary
        header = ["Name", "Passing", "Total", "Pass Rate"]
        if self.cov:
            header.append('Coverage')
        table = [header]
        colalign = ("center", ) * len(header)
        for item in self.cfgs:
            row = []
            for title in item.results_summary:
                row.append(item.results_summary[title])
            if row == []:
                continue
            table.append(row)
        self.results_summary_md = "## " + self.results_title + " (Summary)\n"
        self.results_summary_md += "### " + self.timestamp_long + "\n"
        if self.revision_string:
            self.results_summary_md += "### " + self.revision_string + "\n"
        self.results_summary_md += tabulate(table,
                                            headers="firstrow",
                                            tablefmt="pipe",
                                            colalign=colalign)
        print(self.results_summary_md)
        return self.results_summary_md

    def _publish_results(self):
        '''Publish coverage results to the opentitan web server.'''
        super()._publish_results()

        if self.cov:
            results_server_dir_url = self.results_server_dir.replace(
                self.results_server_prefix, self.results_server_url_prefix)

            log.info("Publishing coverage results to %s",
                     results_server_dir_url)
            cmd = (self.results_server_cmd + " -m cp -R " +
                   self.cov_report_dir + " " + self.results_server_dir)
            try:
                cmd_output = subprocess.run(args=cmd,
                                            shell=True,
                                            stdout=subprocess.PIPE,
                                            stderr=subprocess.STDOUT)
                log.log(VERBOSE, cmd_output.stdout.decode("utf-8"))
            except Exception as e:
                log.error("%s: Failed to publish results:\n\"%s\"", e,
                          str(cmd))