# Copyright lowRISC contributors.
# Licensed under the Apache License, Version 2.0, see LICENSE for details.
# SPDX-License-Identifier: Apache-2.0
# Entry point test Makefile for building and running tests.
# These are generic set of option groups that apply to all testbenches.
# This flow requires the following options to be set:
# DV_DIR       - current dv directory that contains the test Makefile
# DUT_TOP      - top level dut module name
# TB_TOP       - top level tb module name
# DOTF         - .f file used for compilation
# COMPILE_KEY  - compile option set
# TEST_NAME    - name of the test to run - this is supplied on the command line
export TB_TOP   := tb
COMPILE_KEY     ?= default

##########################################################
# A D D    I N D I V I D U A L    T E S T S    B E L O W #
##########################################################
TEST_NAME       ?= xbar_sanity
UVM_TEST        ?= xbar_base_test
UVM_TEST_SEQ    ?= xbar_base_vseq

ifeq (${TEST_NAME},xbar_sanity)
  UVM_TEST_SEQ   = xbar_sanity_vseq
endif

ifeq (${TEST_NAME},xbar_sanity_zero_delays)
  UVM_TEST_SEQ   = xbar_sanity_vseq
  RUN_OPTS      += +zero_delays=1
endif

# max outstanding 64, max 1000 cycle seems big enough
ifeq (${TEST_NAME},xbar_sanity_large_delays)
  UVM_TEST_SEQ   = xbar_sanity_vseq
  RUN_OPTS      += +max_host_req_delay=1000
  RUN_OPTS      += +max_host_rsp_delay=1000
  RUN_OPTS      += +max_device_req_delay=1000
  RUN_OPTS      += +max_device_rsp_delay=1000
endif

ifeq (${TEST_NAME},xbar_sanity_slow_rsp)
  UVM_TEST_SEQ   = xbar_sanity_vseq
  RUN_OPTS      += +max_host_req_delay=10
  RUN_OPTS      += +max_host_rsp_delay=1000
  RUN_OPTS      += +max_device_req_delay=1000
  RUN_OPTS      += +max_device_rsp_delay=10
endif

ifeq (${TEST_NAME},xbar_random)
  UVM_TEST_SEQ   = xbar_random_vseq
endif

ifeq (${TEST_NAME},xbar_random_zero_delays)
  UVM_TEST_SEQ   = xbar_random_vseq
  RUN_OPTS      += +zero_delays=1
endif

ifeq (${TEST_NAME},xbar_random_large_delays)
  UVM_TEST_SEQ   = xbar_random_vseq
  RUN_OPTS      += +max_host_req_delay=1000
  RUN_OPTS      += +max_host_rsp_delay=1000
  RUN_OPTS      += +max_device_req_delay=1000
  RUN_OPTS      += +max_device_rsp_delay=1000
endif

ifeq (${TEST_NAME},xbar_random_slow_rsp)
  UVM_TEST_SEQ   = xbar_random_vseq
  RUN_OPTS      += +max_host_req_delay=10
  RUN_OPTS      += +max_host_rsp_delay=1000
  RUN_OPTS      += +max_device_req_delay=1000
  RUN_OPTS      += +max_device_rsp_delay=10
endif

ifeq (${TEST_NAME},xbar_access_same_device)
  UVM_TEST_SEQ   = xbar_access_same_device_vseq
endif

ifeq (${TEST_NAME},xbar_access_same_device_slow_rsp)
  UVM_TEST_SEQ   = xbar_access_same_device_vseq
  RUN_OPTS      += +max_host_req_delay=10
  RUN_OPTS      += +max_host_rsp_delay=1000
  RUN_OPTS      += +max_device_req_delay=1000
  RUN_OPTS      += +max_device_rsp_delay=10
endif

ifeq (${TEST_NAME},xbar_same_source)
  UVM_TEST_SEQ   = xbar_same_source_vseq
endif

ifeq (${TEST_NAME},xbar_error_random)
  UVM_TEST       = xbar_error_test
  UVM_TEST_SEQ   = xbar_random_vseq
endif

ifeq (${TEST_NAME},xbar_unmapped_addr)
  UVM_TEST_SEQ   = xbar_unmapped_addr_vseq
endif

ifeq (${TEST_NAME},xbar_error_and_unmapped_addr)
  UVM_TEST       = xbar_error_test
  UVM_TEST_SEQ   = xbar_unmapped_addr_vseq
endif

ifeq (${TEST_NAME},xbar_stress_all)
  UVM_TEST_SEQ   = xbar_stress_all_vseq
endif

ifeq (${TEST_NAME},xbar_stress_all_with_error)
  UVM_TEST       = xbar_error_test
  UVM_TEST_SEQ   = xbar_stress_all_vseq
endif

ifeq (${TEST_NAME},xbar_stress_all_with_rand_reset)
  UVM_TEST_SEQ   = xbar_stress_all_with_rand_reset_vseq
endif

ifeq (${TEST_NAME},xbar_stress_all_with_reset_error)
  UVM_TEST       = xbar_error_test
  UVM_TEST_SEQ   = xbar_stress_all_with_rand_reset_vseq
endif

####################################
# Include the tool Makefile below  #
# Dont add anything else below it! #
####################################
include ${DV_DIR}/../../../dv/tools/Makefile