// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
//
// This module is the overall reset manager wrapper

`include "prim_assert.sv"

<%
from topgen.lib import Name
%>\

// This top level controller is fairly hardcoded right now, but will be switched to a template
module rstmgr
  import rstmgr_pkg::*;
  import rstmgr_reg_pkg::*;
  import prim_mubi_pkg::mubi4_t;
#(
  parameter logic [NumAlerts-1:0] AlertAsyncOn = {NumAlerts{1'b1}},
  parameter bit SecCheck = 1,
  parameter int SecMaxSyncDelay = 2
) (
  // Primary module clocks
  input clk_i,
  input rst_ni,
% for clk in reset_obj.get_clocks():
  input clk_${clk}_i,
% endfor
  input clk_por_i,
  input rst_por_ni,

  // POR input
  input [PowerDomains-1:0] por_n_i,

  // Bus Interface
  input tlul_pkg::tl_h2d_t tl_i,
  output tlul_pkg::tl_d2h_t tl_o,

  // Alerts
  input  prim_alert_pkg::alert_rx_t [NumAlerts-1:0] alert_rx_i,
  output prim_alert_pkg::alert_tx_t [NumAlerts-1:0] alert_tx_o,

  // pwrmgr interface
  input pwrmgr_pkg::pwr_rst_req_t pwr_i,
  output pwrmgr_pkg::pwr_rst_rsp_t pwr_o,

  // software initiated reset request
  output mubi4_t sw_rst_req_o,

  // cpu related inputs
  input logic ndmreset_req_i,

  // Interface to alert handler
  input alert_pkg::alert_crashdump_t alert_dump_i,

  // Interface to cpu crash dump
  input rv_core_ibex_pkg::cpu_crash_dump_t cpu_dump_i,

  // dft bypass
  input scan_rst_ni,
  // SEC_CM: SCAN.INTERSIG.MUBI
  input prim_mubi_pkg::mubi4_t scanmode_i,

  // Reset asserted indications going to alert handler
  output rstmgr_rst_en_t rst_en_o,

  // reset outputs
% for intf in export_rsts:
  output rstmgr_${intf}_out_t resets_${intf}_o,
% endfor
  output rstmgr_out_t resets_o

);

  import prim_mubi_pkg::MuBi4False;
  import prim_mubi_pkg::MuBi4True;

  // receive POR and stretch
  // The por is at first stretched and synced on clk_aon
  // The rst_ni and pok_i input will be changed once AST is integrated
  logic [PowerDomains-1:0] rst_por_aon_n;

  for (genvar i = 0; i < PowerDomains; i++) begin : gen_rst_por_aon

      // Declared as size 1 packed array to avoid FPV warning.
      prim_mubi_pkg::mubi4_t [0:0] por_scanmode;
      prim_mubi4_sync #(
        .NumCopies(1),
        .AsyncOn(0)
      ) u_por_scanmode_sync (
        .clk_i,
        .rst_ni,
        .mubi_i(scanmode_i),
        .mubi_o(por_scanmode)
      );

    if (i == DomainAonSel) begin : gen_rst_por_aon_normal
      rstmgr_por u_rst_por_aon (
        .clk_i(clk_aon_i),
        .rst_ni(por_n_i[i]),
        .scan_rst_ni,
        .scanmode_i(prim_mubi_pkg::mubi4_test_true_strict(por_scanmode[0])),
        .rst_no(rst_por_aon_n[i])
      );

      // reset asserted indication for alert handler
      prim_mubi4_sender #(
        .ResetValue(MuBi4True)
      ) u_prim_mubi4_sender (
        .clk_i(clk_aon_i),
        .rst_ni(rst_por_aon_n[i]),
        .mubi_i(MuBi4False),
        .mubi_o(rst_en_o.por_aon[i])
      );
    end else begin : gen_rst_por_domain
      logic rst_por_aon_premux;
      prim_flop_2sync #(
        .Width(1),
        .ResetValue('0)
      ) u_por_domain_sync (
        .clk_i(clk_aon_i),
        // do not release from reset if aon has not
        .rst_ni(rst_por_aon_n[DomainAonSel] & por_n_i[i]),
        .d_i(1'b1),
        .q_o(rst_por_aon_premux)
      );

      prim_clock_mux2 #(
        .NoFpgaBufG(1'b1)
      ) u_por_domain_mux (
        .clk0_i(rst_por_aon_premux),
        .clk1_i(scan_rst_ni),
        .sel_i(prim_mubi_pkg::mubi4_test_true_strict(por_scanmode[0])),
        .clk_o(rst_por_aon_n[i])
      );

      // reset asserted indication for alert handler
      prim_mubi4_sender #(
        .ResetValue(MuBi4True)
      ) u_prim_mubi4_sender (
        .clk_i(clk_aon_i),
        .rst_ni(rst_por_aon_n[i]),
        .mubi_i(MuBi4False),
        .mubi_o(rst_en_o.por_aon[i])
      );
    end
  end
  assign resets_o.rst_por_aon_n = rst_por_aon_n;

  logic clk_por;
  logic rst_por_n;
  prim_clock_buf #(
    .NoFpgaBuf(1'b1)
  ) u_por_clk_buf (
    .clk_i(clk_por_i),
    .clk_o(clk_por)
  );

  prim_clock_buf #(
    .NoFpgaBuf(1'b1)
  ) u_por_rst_buf (
    .clk_i(rst_por_ni),
    .clk_o(rst_por_n)
  );

  ////////////////////////////////////////////////////
  // Register Interface                             //
  ////////////////////////////////////////////////////

  rstmgr_reg_pkg::rstmgr_reg2hw_t reg2hw;
  rstmgr_reg_pkg::rstmgr_hw2reg_t hw2reg;

  logic reg_intg_err;
  // SEC_CM: BUS.INTEGRITY
  // SEC_CM: SW_RST.CONFIG.REGWEN, DUMP_CTRL.CONFIG.REGWEN
  rstmgr_reg_top u_reg (
    .clk_i,
    .rst_ni,
    .clk_por_i  (clk_por),
    .rst_por_ni (rst_por_n),
    .tl_i,
    .tl_o,
    .reg2hw,
    .hw2reg,
    .intg_err_o(reg_intg_err),
    .devmode_i(1'b1)
  );


  ////////////////////////////////////////////////////
  // Errors                                         //
  ////////////////////////////////////////////////////

  // consistency check errors
  logic [${len(leaf_rsts)-1}:0][PowerDomains-1:0] cnsty_chk_errs;
  logic [${len(leaf_rsts)-1}:0][PowerDomains-1:0] shadow_cnsty_chk_errs;

  // consistency sparse fsm errors
  logic [${len(leaf_rsts)-1}:0][PowerDomains-1:0] fsm_errs;
  logic [${len(leaf_rsts)-1}:0][PowerDomains-1:0] shadow_fsm_errs;

  assign hw2reg.err_code.reg_intg_err.d  = 1'b1;
  assign hw2reg.err_code.reg_intg_err.de = reg_intg_err;
  assign hw2reg.err_code.reset_consistency_err.d  = 1'b1;
  assign hw2reg.err_code.reset_consistency_err.de = |cnsty_chk_errs ||
                                                    |shadow_cnsty_chk_errs;
  assign hw2reg.err_code.fsm_err.d  = 1'b1;
  assign hw2reg.err_code.fsm_err.de = |fsm_errs || |shadow_fsm_errs;
  ////////////////////////////////////////////////////
  // Alerts                                         //
  ////////////////////////////////////////////////////
  logic [NumAlerts-1:0] alert_test, alerts;

  // All of these are fatal alerts
  assign alerts[0] = reg2hw.err_code.reg_intg_err.q |
                     |reg2hw.err_code.fsm_err.q;

  assign alerts[1] = reg2hw.err_code.reset_consistency_err.q;

  assign alert_test = {
    reg2hw.alert_test.fatal_cnsty_fault.q & reg2hw.alert_test.fatal_cnsty_fault.qe,
    reg2hw.alert_test.fatal_fault.q & reg2hw.alert_test.fatal_fault.qe
  };

  for (genvar i = 0; i < NumAlerts; i++) begin : gen_alert_tx
    prim_alert_sender #(
      .AsyncOn(AlertAsyncOn[i]),
      .IsFatal(1'b1)
    ) u_prim_alert_sender (
      .clk_i,
      .rst_ni,
      .alert_test_i  ( alert_test[i] ),
      .alert_req_i   ( alerts[i]     ),
      .alert_ack_o   (               ),
      .alert_state_o (               ),
      .alert_rx_i    ( alert_rx_i[i] ),
      .alert_tx_o    ( alert_tx_o[i] )
    );
  end

  ////////////////////////////////////////////////////
  // Input handling                                 //
  ////////////////////////////////////////////////////

  logic ndmreset_req_q;
  logic ndm_req_valid;

  prim_flop_2sync #(
    .Width(1),
    .ResetValue('0)
  ) u_ndm_sync (
    .clk_i,
    .rst_ni,
    .d_i(ndmreset_req_i),
    .q_o(ndmreset_req_q)
  );

  assign ndm_req_valid = ndmreset_req_q & (pwr_i.reset_cause == pwrmgr_pkg::ResetNone);

  ////////////////////////////////////////////////////
  // Source resets in the system                    //
  // These are hardcoded and not directly used.     //
  // Instead they act as async reset roots.         //
  ////////////////////////////////////////////////////

  // The two source reset modules are chained together.  The output of one is fed into the
  // the second.  This ensures that if upstream resets for any reason, the associated downstream
  // reset will also reset.

  logic [PowerDomains-1:0] rst_lc_src_n;
  logic [PowerDomains-1:0] rst_sys_src_n;

  // Declared as size 1 packed array to avoid FPV warning.
  prim_mubi_pkg::mubi4_t [0:0] rst_ctrl_scanmode;
  prim_mubi4_sync #(
    .NumCopies(1),
    .AsyncOn(0)
  ) u_ctrl_scanmode_sync (
    .clk_i (clk_por),
    .rst_ni (rst_por_n),
    .mubi_i(scanmode_i),
    .mubi_o(rst_ctrl_scanmode)
  );

  // lc reset sources
  rstmgr_ctrl u_lc_src (
    .clk_i (clk_por),
    .scanmode_i(prim_mubi_pkg::mubi4_test_true_strict(rst_ctrl_scanmode[0])),
    .scan_rst_ni,
    .rst_req_i(pwr_i.rst_lc_req),
    .rst_parent_ni(rst_por_aon_n),
    .rst_no(rst_lc_src_n)
  );

  // sys reset sources
  rstmgr_ctrl u_sys_src (
    .clk_i (clk_por),
    .scanmode_i(prim_mubi_pkg::mubi4_test_true_strict(rst_ctrl_scanmode[0])),
    .scan_rst_ni,
    .rst_req_i(pwr_i.rst_sys_req | {PowerDomains{ndm_req_valid}}),
    .rst_parent_ni(rst_lc_src_n),
    .rst_no(rst_sys_src_n)
  );

  assign pwr_o.rst_lc_src_n = rst_lc_src_n;
  assign pwr_o.rst_sys_src_n = rst_sys_src_n;


  ////////////////////////////////////////////////////
  // leaf reset in the system                       //
  // These should all be generated                  //
  ////////////////////////////////////////////////////
  // To simplify generation, each reset generates all associated power domain outputs.
  // If a reset does not support a particular power domain, that reset is always hard-wired to 0.

% for i, rst in enumerate(leaf_rsts):
<%
  names = [rst.name]
  err_prefix = [""]
  if rst.shadowed:
    names.append(f'{rst.name}_shadowed')
    err_prefix.append('shadow_')
%>\
  // Generating resets for ${rst.name}
  // Power Domains: ${rst.domains}
  // Shadowed: ${rst.shadowed}
  % for j, name in enumerate(names):
<%rst_name = Name.from_snake_case(name)
%>\
    % for domain in power_domains:
       % if domain in rst.domains:
  rstmgr_leaf_rst #(
    % if rst.name==rst_ni:
    .SecCheck(0),
    % else:
    .SecCheck(SecCheck),
    % endif
    .SecMaxSyncDelay(SecMaxSyncDelay),
    % if rst.sw:
    .SwRstReq(1'b1)
    % else:
    .SwRstReq(1'b0)
    % endif
  ) u_d${domain.lower()}_${name} (
    .clk_i,
    .rst_ni,
    .leaf_clk_i(clk_${rst.clock.name}_i),
    .parent_rst_ni(rst_${rst.parent}_n[Domain${domain}Sel]),
         % if rst.sw:
    .sw_rst_req_ni(reg2hw.sw_rst_ctrl_n[${rst.name.upper()}].q),
         % else:
    .sw_rst_req_ni(1'b1),
         % endif
    .scan_rst_ni,
    .scanmode_i,
    .rst_en_o(rst_en_o.${name}[Domain${domain}Sel]),
    .leaf_rst_o(resets_o.rst_${name}_n[Domain${domain}Sel]),
    .err_o(${err_prefix[j]}cnsty_chk_errs[${i}][Domain${domain}Sel]),
    .fsm_err_o(${err_prefix[j]}fsm_errs[${i}][Domain${domain}Sel])
  );

  % if rst.name!=rst_ni:
  if (SecCheck) begin : gen_d${domain.lower()}_${name}_assert
  `ASSERT_PRIM_FSM_ERROR_TRIGGER_ALERT(
    D${domain.capitalize()}${rst_name.as_camel_case()}FsmCheck_A,
    u_d${domain.lower()}_${name}.gen_rst_chk.u_rst_chk.u_state_regs,
    alert_tx_o[0])
  end
  % endif
      % else:
  assign resets_o.rst_${name}_n[Domain${domain}Sel] = '0;
  assign ${err_prefix[j]}cnsty_chk_errs[${i}][Domain${domain}Sel] = '0;
  assign ${err_prefix[j]}fsm_errs[${i}][Domain${domain}Sel] = '0;
  assign rst_en_o.${name}[Domain${domain}Sel] = MuBi4True;
      % endif
    % endfor
    % if len(names) == 1:
  assign shadow_cnsty_chk_errs[${i}] = '0;
  assign shadow_fsm_errs[${i}] = '0;
    % endif
  % endfor

% endfor

  ////////////////////////////////////////////////////
  // Reset info construction                        //
  ////////////////////////////////////////////////////

  logic rst_hw_req;
  logic rst_low_power;
  logic rst_ndm;
  logic pwrmgr_rst_req;

  // there is a valid reset request from pwrmgr
  assign pwrmgr_rst_req = |pwr_i.rst_lc_req || |pwr_i.rst_sys_req;

  // a reset reason is only valid if the related processing element is also reset.
  // In the future, if ever there are multiple processing elements, this code here
  // must be updated to account for each individual core.
  assign rst_hw_req    = pwrmgr_rst_req &
                         (pwr_i.reset_cause == pwrmgr_pkg::HwReq);
  assign rst_ndm       = ndm_req_valid;
  assign rst_low_power = pwrmgr_rst_req &
                         (pwr_i.reset_cause == pwrmgr_pkg::LowPwrEntry);

  // software initiated reset request
  assign sw_rst_req_o = prim_mubi_pkg::mubi4_t'(reg2hw.reset_req.q);

  // when pwrmgr reset request is received (reset is imminent), clear software
  // request so we are not in an infinite reset loop.
  assign hw2reg.reset_req.de = pwrmgr_rst_req;
  assign hw2reg.reset_req.d  = prim_mubi_pkg::MuBi4False;

  // Only sw is allowed to clear a reset reason, hw is only allowed to set it.
  assign hw2reg.reset_info.low_power_exit.d  = 1'b1;
  assign hw2reg.reset_info.low_power_exit.de = rst_low_power;

  assign hw2reg.reset_info.ndm_reset.d  = 1'b1;
  assign hw2reg.reset_info.ndm_reset.de = rst_ndm;

  // software issued request triggers the same response as hardware, although it is
  // accounted for differently.
  assign hw2reg.reset_info.sw_reset.d = prim_mubi_pkg::mubi4_test_true_strict(sw_rst_req_o) |
                                        reg2hw.reset_info.sw_reset.q;
  assign hw2reg.reset_info.sw_reset.de = rst_hw_req;

  // HW reset requests most likely will be multi-bit, so OR in whatever reasons
  // that are already set.
  assign hw2reg.reset_info.hw_req.d  = pwr_i.rstreqs[pwrmgr_pkg::HwResetWidth-1:0] |
                                       reg2hw.reset_info.hw_req.q;
  assign hw2reg.reset_info.hw_req.de = rst_hw_req;

  ////////////////////////////////////////////////////
  // Crash info capture                             //
  ////////////////////////////////////////////////////

  logic dump_capture;
  assign dump_capture =  rst_hw_req | rst_ndm | rst_low_power;

  // halt dump capture once we hit particular conditions
  logic dump_capture_halt;
  assign dump_capture_halt = rst_hw_req;

  rstmgr_crash_info #(
    .CrashDumpWidth($bits(alert_pkg::alert_crashdump_t))
  ) u_alert_info (
    .clk_i(clk_por_i),
    .rst_ni(rst_por_ni),
    .dump_i(alert_dump_i),
    .dump_capture_i(dump_capture & reg2hw.alert_info_ctrl.en.q),
    .slot_sel_i(reg2hw.alert_info_ctrl.index.q),
    .slots_cnt_o(hw2reg.alert_info_attr.d),
    .slot_o(hw2reg.alert_info.d)
  );

  rstmgr_crash_info #(
    .CrashDumpWidth($bits(rv_core_ibex_pkg::cpu_crash_dump_t))
  ) u_cpu_info (
    .clk_i(clk_por_i),
    .rst_ni(rst_por_ni),
    .dump_i(cpu_dump_i),
    .dump_capture_i(dump_capture & reg2hw.cpu_info_ctrl.en.q),
    .slot_sel_i(reg2hw.cpu_info_ctrl.index.q),
    .slots_cnt_o(hw2reg.cpu_info_attr.d),
    .slot_o(hw2reg.cpu_info.d)
  );

  // once dump is captured, no more information is captured until
  // re-eanbled by software.
  assign hw2reg.alert_info_ctrl.en.d  = 1'b0;
  assign hw2reg.alert_info_ctrl.en.de = dump_capture_halt;
  assign hw2reg.cpu_info_ctrl.en.d  = 1'b0;
  assign hw2reg.cpu_info_ctrl.en.de = dump_capture_halt;

  ////////////////////////////////////////////////////
  // Exported resets                                //
  ////////////////////////////////////////////////////
% for intf, eps in export_rsts.items():
  % for ep, rsts in eps.items():
    % for rst in rsts:
  assign resets_${intf}_o.rst_${intf}_${ep}_${rst['name']}_n = resets_o.rst_${rst['name']}_n;
    % endfor
  % endfor
% endfor


  ////////////////////////////////////////////////////
  // Assertions                                     //
  ////////////////////////////////////////////////////

  `ASSERT_INIT(ParameterMatch_A, NumHwResets == pwrmgr_pkg::HwResetWidth)

  // when upstream resets, downstream must also reset

  // output known asserts
  `ASSERT_KNOWN(TlDValidKnownO_A,    tl_o.d_valid  )
  `ASSERT_KNOWN(TlAReadyKnownO_A,    tl_o.a_ready  )
  `ASSERT_KNOWN(AlertsKnownO_A,      alert_tx_o    )
  `ASSERT_KNOWN(PwrKnownO_A,         pwr_o         )
  `ASSERT_KNOWN(ResetsKnownO_A,      resets_o      )
  `ASSERT_KNOWN(RstEnKnownO_A,       rst_en_o      )
% for intf in export_rsts:
  `ASSERT_KNOWN(${intf.capitalize()}ResetsKnownO_A, resets_${intf}_o )
% endfor

  // Alert assertions for reg_we onehot check
  `ASSERT_PRIM_REG_WE_ONEHOT_ERROR_TRIGGER_ALERT(RegWeOnehotCheck_A, u_reg, alert_tx_o[0])
endmodule // rstmgr