{
  name: "i2c"
  import_testplans: ["hw/dv/tools/testplans/csr_testplan.hjson",
                     "hw/dv/tools/testplans/intr_test_testplan.hjson",
                     "hw/dv/tools/testplans/tl_device_access_types_testplan.hjson"]
  entries: [
    {
      name: sanity
      desc: '''Basic I2C sanity test with few bytes transmitted and received asynchronously
            and in parallel with scoreboard checks (support options for ro, wo, or rw)

            Stimulus:
              - Enable I2C host.
              - Clear/Enable interrupt (if nedded).
              - Program OVRD, FDATA register.
              - Randomize I2C timing in TIMING 0-4 registers and other parameters such as TL agent delays
              - Randomize address and data for write and read transfers sent to the device.

            Checking:
              - Check the timing behavior of START, STOP, ACK, NACK, and "repeated" START.
              - Read and write transfer matching.'''
      milestone: V1
      tests: ["i2c_sanity_ro", "i2c_sanity_wo", "i2c_sanity_rw"]
    }
    {
      name: override
      desc: '''Test SCL/SDA override

            Stimulus:
              - Program OVRD register.

            Checking:
              - Check scl_o, sda_o override by programmed values in the OVRD register.'''
      milestone: V1
      tests: ["i2c_override"]
    }
    {
      name: fmt_watermark
      desc: '''Test fmt_watermark interrupt.

            Stimulus:
              - Program random fmt (format) fifo watermark level and keep pushing data out by writing to
            wdata.

            Checking:
              - As the number of pending data entries in the fmt fifo reaches the programmed
                watermark level, ensure that the fmt watermark interrupt is asserted.
              - Read the fifo status to cross-check, ensure interrupt stays asserted until cleared.'''
      milestone: V2
      tests: ["i2c_fmt_watermark"]
    }
    {
      name: rx_watermark
      desc: '''Test rx_watermark interrupt.

            Stimulus:
              - Program random rx watermark level. Keep sending data over rx and read rdata
                register in parallel with randomized delays large enough to reach a point where
                the number of pending data items in rx fifo reaches the watermark level.

            Checking:
              - When that happens, check that the interrupt is asserted.'''
      milestone: V2
      tests: ["i2c_rx_watermark"]
    }
    {
      name: fmt_reset
      desc: '''Test fmt_fifo reset.

            Stimulus:
              - Fill up the fmt fifo with data to be sent out. After a random number (less than
                filled fifo size) of bytes shows up on fmt, reset the fifo.

            Checking:
              - Ensure that the remaining data bytes do not show up after fmt_fifo is reset.'''
      milestone: V2
      tests: ["i2c_fmt_reset"]
    }
    {
      name: rx_reset
      desc: '''Test rx_reset reset.

            Stimulus:
              - Fill up the rx fifo by sending data bytes in over rx. After a random number
                (less than filled fifo size) of bytes sent over rx, reset the fifo.

            Checking:
              - Ensure that reads to rdata register yield 0s after rx_fifo is reset.'''
      milestone: V2
      tests: ["i2c_rx_reset"]
    }
    {
      name: fmt_overflow
      desc: '''Test fmt_overflow interrupt.

            Stimulus:
              - Keep writing over 32 bytes of data into wdata register.

            Checking:
              - Ensure excess data bytes are dropped and overflow interrupt is asserted.'''
      milestone: V2
      tests: ["i2c_fmt_overflow"]
    }
    {
      name: rx_overflow
      desc: '''Test rx_overflow interrupt.

            Stimulus:
              - Keep sending over 32 bytes of data over rx.

            Checking:
              - Ensure excess data bytes are dropped.'''
      milestone: V2
      tests: ["i2c_rx_overflow"]
    }
    {
      name: fmt_rx_fifo_full
      desc: '''Test fmt_fifo and rx_fifo in full states.

            Stimulus:
              - Send over 32 bytes of data but stop when fmt/rx fifo is full.

            Checking:
              - Check full states by reading fifo status register.'''
      milestone: V2
      tests: ["i2c_fmt_rx_fifo_full"]
    }
    {
      name: rx_timeout
      desc: '''Test rx_timeout state.

            Stimulus:
              - Program timeout_ctrl register to randomize the timeout. Send random number of
                data over rx and read fewer data than sent and let the DUT sit idle or the
                programmed timeout duration.

            Checking:
              - Ensure timeout interrupt fires.'''
      milestone: V2
      tests: ["i2c_rx_timeout"]
    }
    {
      name: stress
      desc: '''Test multiple interrupts asserted.

            Stimulus:
              - Do combinations of multiple of above scenarios to get multiple interrupts
                asserted at the same time. Scoreboard should be robust enough to deal with all
                scenarios.

            Checking:
              - Ensure all interrupt asserted.'''
      milestone: V2
      tests: ["i2c_stress"]
    }
    {
      name: rw_loopback
      desc: '''Test write data, read loopback, then compare.

            Stimulus:
              - Drive i2c host to write data to the device then read loopback.

            Checking:
              - After loopback is done, read data should be match with write data.'''
      milestone: V2
      tests: ["i2c_rw_loopback"]
    }
  ]
}