// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#include "sw/device/lib/dif/dif_rv_timer.h"
#include "sw/device/lib/irq.h"
#include "sw/device/lib/runtime/hart.h"
#include "sw/device/lib/runtime/ibex.h"
#include "sw/device/lib/runtime/log.h"
#include "sw/device/lib/testing/test_framework/check.h"
#include "sw/device/lib/testing/test_framework/ottf_main.h"

#include "hw/top_earlgrey/sw/autogen/top_earlgrey.h"

static dif_rv_timer_t timer;

// Flag for checking whether the interrupt handler was called. When the handler
// is entered, this value *must* be set to false, to catch false positives.
//
// This variable is volatile, since it may suddenly change from the compiler's
// perspective (e.g., due to an interrupt firing).
static volatile bool irq_fired = true;

// NOTE: PLIC targets need not line up with hart ids; in the future, we should
// generate hart ID constants elsewhere.
static const uint32_t kHart = (uint32_t)kTopEarlgreyPlicTargetIbex0;
static const uint32_t kComparator = 0;

static const uint64_t kTickFreqHz = 1000 * 1000;  // 1 MHz.

static void test_handler(void) {
  CHECK(!irq_fired, "Entered IRQ handler, but `irq_fired` was not false!");

  bool irq_flag;
  CHECK_DIF_OK(dif_rv_timer_irq_is_pending(
      &timer, kDifRvTimerIrqTimerExpiredHart0Timer0, &irq_flag));
  CHECK(irq_flag, "Entered IRQ handler but the expected IRQ flag wasn't set!");

  CHECK_DIF_OK(
      dif_rv_timer_counter_set_enabled(&timer, kHart, kDifToggleDisabled));
  CHECK_DIF_OK(dif_rv_timer_irq_acknowledge(
      &timer, kDifRvTimerIrqTimerExpiredHart0Timer0));

  irq_fired = true;
}

// Override default OTTF timer ISR.
void ottf_timer_isr(void) {
  LOG_INFO("Entering handler_irq_timer()");
  test_handler();
  LOG_INFO("Exiting handler_irq_timer()");
}

const test_config_t kTestConfig;

bool test_main(void) {
  irq_global_ctrl(true);
  irq_timer_ctrl(true);

  CHECK_DIF_OK(dif_rv_timer_init(
      mmio_region_from_addr(TOP_EARLGREY_RV_TIMER_BASE_ADDR), &timer));
  CHECK_DIF_OK(dif_rv_timer_reset(&timer));

  dif_rv_timer_tick_params_t tick_params;
  CHECK_DIF_OK(dif_rv_timer_approximate_tick_params(kClockFreqPeripheralHz,
                                                    kTickFreqHz, &tick_params));
  CHECK_DIF_OK(dif_rv_timer_set_tick_params(&timer, kHart, tick_params));
  CHECK_DIF_OK(dif_rv_timer_irq_set_enabled(
      &timer, kDifRvTimerIrqTimerExpiredHart0Timer0, kDifToggleEnabled));

  uint64_t current_time;
  // Logs over UART incur a large runtime overhead. To accommodate that, the
  // timer deadline needs to be large as well. In DV simulations, logs are not
  // sent over UART, so we can reduce the runtime / sim time with a much shorter
  // deadline (30 ms vs 100 us).
  uint64_t kDeadline =
      (kDeviceType == kDeviceSimDV) ? 100 /* 100 us */ : 30000 /* 30 ms */;
  CHECK_DIF_OK(dif_rv_timer_counter_read(&timer, kHart, &current_time));
  LOG_INFO("Current time: %d; timer theshold: %d", (uint32_t)current_time,
           (uint32_t)(current_time + kDeadline));
  CHECK_DIF_OK(
      dif_rv_timer_arm(&timer, kHart, kComparator, current_time + kDeadline));

  irq_fired = false;
  CHECK_DIF_OK(
      dif_rv_timer_counter_set_enabled(&timer, kHart, kDifToggleEnabled));

  LOG_INFO("Waiting...");
  while (!irq_fired) {
    wait_for_interrupt();
  }

  return true;
}