# Getting Started

This guide will walk you through setup and general use of Pigweed.
We hope to make the setup process as smooth as possible. If any of this doesn't
work, please [let us know](mailto:pigweed@googlegroups.com).

## Express setup

If you'd like to skip the detailed explanations, below is the shorter version of
getting setup for Pigweed. If you run into trouble, look at the more in-depth
guide below, starting at [Prerequisites](getting_started.md#prerequisites). The
express setup configures Pigweed's watcher for three targets to give a taste of
Pigweed:

1. **Host** - Mac, Linux, or Windows. Builds and runs tests
2. **Device/STM32F429** - Build only; see later in the guide to run tests on
   device
3. **Docs** - Builds the Pigweed docs

To get setup:

(1) Make sure you have Git and Python installed and on your path.

(2) Clone Pigweed and bootstrap the environment (compiler setup & more). **Be
    patient, this step downloads ~1GB of LLVM, GCC, and other tooling**.

```bash
$ cd ~
$ git clone https://pigweed.googlesource.com/pigweed/pigweed
...
$ cd pigweed
$ . ./bootstrap.sh
...
```

(3) Configure the three target GN builds: host, device, and docs.

```bash
$ gn gen out/host
Done. Made 275 targets from 67 files in 417ms
$ gn gen --args='pw_target_config = "//targets/stm32f429i-disc1/target_config.gni"' out/disco
Done. Made 220 targets from 65 files in 424ms
$ gn gen --args='pw_target_config = "//targets/docs/target_config.gni"' out/docs
Done. Made 284 targets from 65 files in 415ms
```

(4) Start the watcher. The watcher will invoke Ninja to build all the targets

```bash
$ pw watch

 ▒█████▄   █▓  ▄███▒  ▒█    ▒█ ░▓████▒ ░▓████▒ ▒▓████▄
  ▒█░  █░ ░█▒ ██▒ ▀█▒ ▒█░ █ ▒█  ▒█   ▀  ▒█   ▀  ▒█  ▀█▌
  ▒█▄▄▄█░ ░█▒ █▓░ ▄▄░ ▒█░ █ ▒█  ▒███    ▒███    ░█   █▌
  ▒█▀     ░█░ ▓█   █▓ ░█░ █ ▒█  ▒█   ▄  ▒█   ▄  ░█  ▄█▌
  ▒█      ░█░ ░▓███▀   ▒█▓▀▓█░ ░▓████▒ ░▓████▒ ▒▓████▀

20200319 01:41:37 INF Starting Pigweed build watcher
20200319 01:41:37 INF Searching for GN build dirs...
20200319 01:41:37 INF Will build [1/3]: out/host
20200319 01:41:37 INF Will build [2/3]: out/disco
20200319 01:41:37 INF Will build [3/3]: out/docs
20200319 01:41:39 INF Directory to watch: $HOME/wrk/pigweed
20200319 01:41:39 INF Watching for file changes. Ctrl-C exits.
20200319 01:41:39 INF Triggering initial build...
...
```

(5) **Congratulations, you're ready to go!** Now take Pigweed for a spin with
    the below steps.

(6) With the watcher running in a separate window, edit
    `pw_status/status_test.cc` to make an expectation fail; for example, add
    `EXPECT_EQ(0, 1);` in a test.

(7) Save the file. Observe the watcher rebuild & retest, and fail. Restore the
    test if you feel like it.

(8) Open the generated docs in `out/docs/gen/docs/html/index.html` in your
    browser.

(9) Edit `docs/getting_started.md` (this file!) and make any change. Save. See
    the watcher rebuild the docs. Reload your browser, and see the changes.

See below for equivalent Windows commands, and for more details on what each
part does.

**Note:** After running bootstrap once, use `. ./activate.sh` (or
`activate.bat` on Windows) to re-activate the environment without
re-bootstrapping.

## Prerequisites

**Linux**<br/>
Most Linux installations should work out of box, and not require any manual
installation of prerequisites beyond basics like `git` and `build-essential`.
Make sure gcc is set to gcc-8.

**macOS**<br/>
macOS does not require any prerequisites to be installed, but you may run into
some Mac-specific configuration issues when you begin the bootstrap process.

To flash firmware to a STM32 Discovery development board (and run `pw test`)
from macOS, you will need to install OpenOCD. Install Homebrew using the latest
instructions at https://brew.sh/, then install OpenOCD with
`brew install openocd`.

**Windows**<br/>
To start using Pigweed on Windows, you'll need to install
[Git](https://git-scm.com/download/win) and
[Python](https://www.python.org/downloads/windows/) (2.7 or above). We recommend
you install Git to run from the command line and third party software.

If you plan to flash devices with firmware, you'll need to install OpenOCD and
ensure it's on your system path.

## Bootstrap

Once you satisfied the prerequisites, you will be able to clone Pigweed and
run the bootstrap that initializes the Pigweed virtual environment. The
bootstrap may take several minutes to complete, so please be patient.

**Linux/macOS**
```bash
$ git clone https://pigweed.googlesource.com/pigweed/pigweed ~/pigweed
$ cd ~/pigweed
$ . ./bootstrap.sh
```

**Windows**
```batch
:: Run git commands from the shell you set up to use with Git during install.
> git clone https://pigweed.googlesource.com/pigweed/pigweed %HOMEPATH%\pigweed
> cd %HOMEPATH%\pigweed
> bootstrap.bat
```

Below is a real-time demo with roughly what you should expect to see as output:

![build example using pw watch](images/pw_env_setup_demo.gif)

Congratulations, you are now set up to start using Pigweed!

## Pigweed Environment

After going through the initial setup process, your current terminal will be in
the Pigweed development environment that provides all the tools you should need
to develop on Pigweed. If you leave that session, you can activate the
environment in a new session with the following command:

**Linux/macOS**
```bash
$ . ./activate.sh
```

**Windows**
```batch
> activate.bat
```

Some major changes may require triggering the bootstrap again, so if you run
into host tooling changes after a pull it may be worth re-running bootstrap.

## Build Pigweed for Host

Pigweed's primary build system is GN/Ninja based. There are CMake and Bazel
builds in-development, but they are incomplete and don't have feature parity
with the GN build. We strongly recommend you stick to the GN build system.

GN (Generate Ninja) just does what it says on the tin; GN generates
[Ninja](https://ninja-build.org/) build files.

The default GN configuration generates build files that will result in
executables that can be run on your host machine.

Run GN as seen below:

```bash
$ gn gen out/host
```

Note that `out/host` is simply the directory the build files are saved to.
Unless this directory is deleted or you desire to do a clean build, there's no
need to run GN again; just rebuild using Ninja directly.

Now that we have build files, it's time to build Pigweed!

Now you *could* manually invoke the host build using `ninja -C out/host` every
time you make a change, but that's tedious. Instead, let's use `pw_watch`.

Go ahead and start `pw_watch`:

```bash
$ pw watch
```

When `pw_watch` starts up, it will automatically build the directory we
generated in `out/host`. Additionally, `pw_watch` watches source code files for
changes, and triggers a Ninja build whenever it notices a file has been saved.
You might be surprised how much time it can save you!

With `pw watch` running, try modifying `pw_status/public/pw_status/status.h` and
watch the build re-trigger when you save the file.

See below for a demo of this in action:

![build example using pw watch](images/pw_watch_build_demo.gif)

## Running Unit Tests

Fun fact, you've been running the unit tests already! Ninja builds targeting the
host automatically build and run the unit tests. Unit tests err on the side of
being quiet in the success case, and only output test results when there's a
failure.

To see the a test failure, you can modify `pw_status/status_test.cc` to fail
by changing one of the strings in the "KnownString" test.

![example test failure using pw watch](images/pw_watch_test_demo.gif)

Running tests as part of the build isn't particularly expensive because GN
caches passing tests. Each time you build, only the tests that are affected
(whether directly or transitively) by the code changes since the last build will
be re-built and re-run.

Try running the `pw_status` test manually:
```bash
$ ./out/host/obj/pw_status/status_test
```

## Building for a Device

As mentioned previously, Pigweed builds for host by default. In the context of
Pigweed, a Pigweed "target" is a build configuration that sets a toolchain,
default library configurations, and more to result in binaries that may be run
natively on the target.

Let's generate another build directory, but this time specifying a different
target:

**Linux/macOS**
```bash
$ gn gen --args='pw_target_config = "//targets/stm32f429i-disc1/target_config.gni"' out/disco
```

**Windows**
```batch
> gn gen --args="pw_target_config = ""//targets/stm32f429i-disc1/target_config.gni""" out/disco
```

Switch to the window running `pw_watch`, and quit using `ctrl+c`.
To get `pw_watch` to build the new directory as well, re-launch it:

```bash
$ pw watch
```

Now `pw_watch` is building for host and a device!

## Running Tests on a Device

While tests run automatically on the host, it takes a few more steps to get
tests to run automatically on a device, too. Even though we've verified tests
pass on the host, it's crucial to verify the same with on-device testing. We've
encountered some unexpected bugs that can only be found by running the unit
tests directly on the device.

### 1. Connect Device(s)
Connect any number of STM32F429I-DISC1 boards to your computer using the mini
USB port on the board (**not** the micro USB). Pigweed will automatically detect
the boards and distribute the tests across the devices. More boards = faster
tests!

![development boards connected via USB](images/stm32f429i-disc1_connected.jpg)

### 2. Launch Test Server
To allow Ninja to run tests on an arbitrary number of devices, Ninja will send
test requests to a server running in the background. Launch the server in
another window using the command below (remember, you'll need to activate the
Pigweed environment first).

```shell
  $ stm32f429i_disc1_test_server
```

**Note:** If you attach or detach any more boards to your workstation you'll
need to relaunch this server.

### 3. Configure GN

We can tell GN to use the testing server by enabling a build arg specific to
the stm32f429i-disc1.

```shell
$ gn args out/disco
# Append this line to the file that opens in your editor to tell GN to run
# on-device unit tests.
pw_use_test_server = true
```

### Done!

Whenever you make code changes and trigger a build, all the affected unit tests
will be run across the attached boards!

See the demo below for an example of what this all looks like put together:

![pw watch running on-device tests](images/pw_watch_on_device_demo.gif)

## Building the Documentation

In addition to the markdown documentation, pigweed has a collection of
information-rich RST files that can be built by adding another build target.

To generate documentation build files, invoke GN again:

**Linux/macOS**
```bash
$ gn gen --args='pw_target_config = "//targets/docs/target_config.gni"' out/docs
```

**Windows**
```batch
> gn gen --args="pw_target_config = ""//targets/docs/target_config.gni""" out/docs
```

Once again, either restart `pw_watch`, or manually run `ninja -C out/docs`. When
the build completes, you will find the documents at `out/docs/gen/docs/html`.

## Next steps

This concludes the introduction to developing with Pigweed. If you'd like to see
more of what Pigweed has to offer, feel free to dive into the per-module
documentation. If you run into snags along the way, please [let us
know](mailto:pigweed@googlegroups.com)!